Dark Light

HT.HP. Soft flow


HTHP Soft flow

  • First and foremost, HTHP Soft Flow Dyeing Machine is suitable for sensitive surface structures and natural fabrics. All fabrics like cotton, wool, viscose, acrylic and blends of jersey, terry towel, velour and nylon.
  • Secondly, HTHP Soft Flow Machine is a contemporary technology that uses a curved nozzle to transfer the cloth smoothly at a high fluid flow. As a result, reduce strain and avoid creases and peeling. 
  • Thirdly, by the new design, HTHP Soft Flow takes the Lowest liquor ratio up to 1:5 (on wet material) instead of the conventional design taking the liquor ratio up to 1:10 (on wet).
  • FourthlyHTHP Soft Flow is made of high-quality steel inside and out, making it rust-resistant.
  • Fifthly, the nozzles inside HTHP Soft Flow come with 316L Quality stainless steel. It gives smooth operation to the cloth.
  • Lastly, HTHP Soft Flow includes numerous safety features. 

In conclusion, it is perfect for modern textile dyeing plants. 

🔸 Technical Specification

✅ Lowest liquor ratio up to 1:5 (wet Fabric)
✅ Capacity: 50 to 2000 kg.
✅ Dye –30 To 500 Grms/Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ High Temp. – Up to 140° C.
✅ The vessel builds from stainless steel SS 316L Quality.

➡ Online filter for easy clean-up even during the process with an extra filter mesh.
➡ For smooth fabric circulation, a Teflon Sheet is inside the chamber.
➡ Cup type very soft nozzle with low pressure & higher volume design.
The fabric driving reel comes with a frequency controller. 


1,250,000.00

Compare

HTHP Soft flow

  • First and foremost, HTHP Soft Flow is suitable for sensitive surface structures and natural fabrics. All fabrics like cotton, wool, viscose, acrylic and blends of jersey, terry towel, velour and nylon.
  • Secondly, HTHP Soft Flow is a contemporary technology that uses a curved nozzle to transfer the cloth smoothly at a high fluid flow. As a result, reduce strain and avoid creases and peeling. 
  • Thirdly, by the new design, HTHP Soft Flow takes the Lowest liquor ratio up to 1:5 (on wet material) instead of the conventional design taking liquor ratio up to 1:10 (on wet).
  • FourthlyHTHP Soft Flow is made of high-quality steel inside and out, making it rust-resistant.
  • Fifthly, the nozzles inside HTHP Soft Flow come with 316L Quality stainless steel. It gives smooth operation to the cloth.
  • Lastly, HTHP Soft Flow includes numerous safety features. 

In conclusion, it is perfect for modern textile dyeing plants. 

🔸 Technical Specification

✅ Lowest liquor ratio up to 1:5 (wet Fabric)
✅ Capacity: 50 to 2000Kg.
✅ Dye –30 To 500 Grms/Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ High Temp. – Up to 140° C.
✅ The vessel build from stainless steel SS 316L Quality

➡ Online filter for easy clean-up even during the process with an extra filter mesh.
➡ For smooth fabric circulation, a Teflon Sheet inside the chamber.
➡ Cup type very soft nozzle with low presser & higher volume design.
The fabric driving reel comes with a frequency controller.

🔸 Payment, Taxes and Delivery

Payment: Before dispatch, 40% advance & balance against Proforma Invoice.
Delivery: Delivery of the machinery ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales TaxGST 18% (Domestic Orders) Or Vat 4% +1% No CST against form “H”( export orders).
Erection: Will be charged extra per machinery over and above price.


  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.

SKU: D/HSF-1 Category:
Capacity 125 Kgs/ Chamber

NA, 25 Kgs, 50 Kgs, 75 Kgs, 100 Kgs, 125 Kgs, 250 Kgs, 375 Kgs, 500 Kgs, 625 Kgs, 750 Kgs, 875 Kgs, 1000 Kgs, 1125 Kgs, 1250 Kgs, 1375 Kgs, 1500 Kgs, 1625 Kgs, 1750 Kgs, 1875 Kgs, 2000 Kgs

Capacity 150 Kgs/ Chamber

NA, 150 Kgs, 300 Kgs, 450 Kgs, 600 Kgs, 750 Kgs, 900 Kgs, 1050 Kgs, 1200 Kgs, 1350 Kgs, 1500 Kgs, 1750 Kgs, 1900 Kgs

Nossel size

105mm, 120mm, 140mm, 200mm, 250mm, 300mm

Fabric

COTTON, WOOL, ACRYLIC, VELOUR, NYLON, KNITTED

 

 

 

 

 

 

 

 

 

 

 

Dimensions

Dimensions

 

 

 

 

 

 

 

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “HT.HP. Soft flow”

There are no reviews yet.

  • Rubber Blanket

    (1)

    Rubber Blanket

    in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:

    • Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
    • Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
    • Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
    • Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
    • Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.

    Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.

    🔶 Technical Specification

    • Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
    • Fabric Width: offer current width of 1200mm to 3500mm.
    • Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
    • Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
    • Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
    • The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
    • Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage. 

    Compressive Shrinking RangeComfit Machine

    In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.

     


     

     

    SKU: n/a
  • Denim Finishing Range

    0 out of 5
    (0)

    Denim Finishing Range

    The Denim Finishing Range Exclusive purpose is to ensure that the garment made from such fabric does not shrink after the wash hence perfect dimensional stability.

    As per standard, + / -1 % residual shrinkage is acceptable. Denim Finishing Range is available for up to  3600mm working width fabric to assure total shrinkage protection to Denim fabrics. 

    Denim Finishing Range was developed in a way that can shrinkage up to 14% in a single passage.

    Denim Finishing Range is usually the last process in the sequence of fabric finishing. The Denim fabric processed in Denim Finishing Range gets fully shrunk.

    Before Denim Finishing Range, it is advisable to establish the width at which the cloth should get shrunk in length to meet the requirement of the garment makers. It is the best Fabric Finishing machinery.

    🔸 Key Features:

    ✅ Ensuring Required Shrinkage of 14 Ounce Denim in Single RUN At a Speed of 40 to 50 Mtrs / Min.
    ✅ Matching all parameters of Shrinkage, Feel, Warp & Weft Tension.
    ✅ Complete Machine with P.L.C. Controlled Inverter Drive.
    ✅ Large Touch Screen, Showing Shrinkage, Speed and Other Data, Minimum Usage, of Steam & Power.
    ✅ User-friendly machine with the shortest Payback time.
    ✅ Can finish lycra fabrics in a single run with required weft and warp shrinkage at the speed of 40 mt / min.
    ✅ Specially designed heavy warp pull to control the width of the fabric and warp stretch control by P L C.
    ✅ Motorized antiskew device to control the skew setting of fabric twill by forwarding and reversing the movement of motors.
    ✅ Specially developed a shrinking unit to achieve shrinkage up to 14 % depending upon the quality of the fabric with residual shrinkage of 1 %.
    ✅ 2500mm dia Mirror polished Jacketed main palmer cylinder with rotary joints.
    ✅ The number of 2 cooling cylinders is provided at the exit of the palmer unit to cool down the fabrics.
    ⭕ Singing unit at the feeding side. (Optional)
    ⭕ Brushing unit at feeding side. (Optional)
    ⭕ Temperature controlling of shrinkage and palmer unit by PLC. (Optional)
    ⭕ Big Batching device with ‘J’ scray at plating side. (Optional)

     

    SKU: F/DFR-1
  • CP Dyeing

    0 out of 5
    (0)

    CP Dyeing

    CP Dyeing is dyeing machinery to Dye Fabrics rapidly. Dye Fabric. This machine has the following features.

    • First, it dyes the cloth with reactive colours. The CP Dyeing is installed with a small vat & shaped to allow fabrics an adequate contact time for absorbing dye bath through the high speed of cloth.
    • In other words, CP Dyeing dyes the cloth rapidly, with less place required.
    • Secondly, Reduced liquor volume is possible due to the fast exchange of fluid. Therefore, less wastage of resources.
    • ThirdlyCP Dyeing‘s Roller width can be made from 1200mm to 3000mm depending on the client’s need.

    🔶 Special Features:

    ✅ Versatile because it is equally suitable for Light and Heavy fabrics.
    ✅ Utilising of “Two Nip Two Dip” method ensures consistent colour penetration.
    ✅ The Top rubber roller is anti-deflecting construction.
    ✅ On Nips, pneumatic loading can be as much as 6 tons.
    ✅ Minimum loss of dye liquor because of low Dye liquor content in the trough.
    ✅ The main Batcher can batch cloth up to 1500mm Dia.
    ✅ Drive to both padder & Batcher by inverter-controlled AC Drive.
    ✅ Minimum tension between padder & Batcher is for perfect winding of cloth.
    ✅ The minimum distance between Padder & Batcher is to avoid oxidation.
    ✅ Machines are available from 1200mm to 3000mm roller width.

     

     

    SKU: n/a
  • Hydraulic Jigger

    0 out of 5
    (0)

    Hydraulic Jigger

    Hydraulic Jigger is a piece of revolutionary equipment for open-width Scouring, Bleaching & Dyeing processes in batch form. One of the best Dyeing machinery with perfect dyeing results. Hydraulic Jigger has the following features:

    • Firstly, Hydraulic Jigger’s Adjustable tension according to Fabric quality ensures perfect pre-treatment and dyeing irrespective of run lengths for the same shade/colour. In other words, Hydraulic Jigger dyes the Clothing rapidly with accuracy.
    • Secondly, Hydraulic Jigger comes with closed chambers with doors that close while the operation is performing. Which gives it desired temperature in less time. Therefore, less wastage of resources.
    • Thirdly, Consistent dyeing of the same shade for any number of times in the future, Moreover the highly efficient washing system saves washing time and precious Water. The uniform tension, process time, and ideal temperature contribute to the dying quality. 
    • Fourthly, Hydraulic Jigger controls these parameters resulting in fully controllable and reproducible shades. The controlled temperature and a steady circulation of dye liquid for flawless dyeing. PLC aided operation for repeatability. Suiting, shirting, and delicate fabrics such as rayon are best suited. 
    • Fifthly, the Hydraulic Jigger is available in 500kg and 1000kg capacity from 1200mm to 3000mm working width depending on the client’s need. Fabric ranging from 70 to 700 gsm/meter square of woven material may be dyed in a Hydraulic Jigger, making it ideal for Suiting, Shirting, and Delicate textile such as rayon.

    Above all, flawless synchronisation of linear speed results in tension-free and crease-free fabric conveyance throughout the process. 

    🔸 Technical Specification

    ➡ Automatic reversal at the end of each cycle setting
    ➡ Spray washing through a selector switch
    ➡ Stopping the machine at the pre-determined sampling point
    ➡ Water filling through rotary switch
    ➡ Drain through a selector switch
    ➡ Digital Speed indication
    ➡ Speed setting through P L C
    ➡ Replenishing from dosing tank through valve
    ➡ Indirect steam heating through Heat Exchanger
    ➡ Temperature Controller.
    ➡ A valve adjusts the tension on the cloth.
    ➡ Soft Start & Stop
    ➡ Pendulation when adding and emptying liquid
    ➡ Touch Screen
    ➡ Specially designed software for the machine


     

    SKU: n/a
  • Jigger

    0 out of 5
    (0)

    Fabric dyeing machines can come in all shapes and sizes, but

    Jigger is typically an open-framed machine with a rotating drum that holds the fabric to be dyed. Jigger is the standard and oldest way to dye cotton and cotton blend fabric.

    The jigger machine has been used for a long time to treat small to medium size lots of woven fabric with an open-width exhaust dyeing process. Dye jiggers are available in Two variants 1st Jigger is an Open type with the following options:

    ✅ Fully S.S. construction or Mounted on C.I. Walls.
    ✅ With a water re-circulation system and temperature controllers.
    ✅ A.C. Motor drive or Inverter Control Drive
    ✅ Semi Automatic or Fully Automatic
    S.S. Cladded Batch Rollers of Ebonite coated Batch Rollers

    2nd one is a Close type with the following advancement:


    ✅ Gear Box Type Semi Automatic Maxi Jigger Machine
    S.S. Spring Type Floating Device
    ✅ Roof Heating is Provided to Prevent Dropping on Fabrics
    ✅ Direct & Indirect Heating with Temperature Controller
    ✅ Auto R/F System with Cycle Contrail with the help of PLC
    ⭕ Pneumatic Operated Auto Drain (Optional)
    ⭕ A Direct Mounted Reduction Gear Box (Optional)

    🔸 Technical Specification

    The Machines are available from 1250mm to 3400mm in width
    ✅ Roll Center: 25″, 31″, 36″, 41″
    Complete Stainless Steel Body with M.S. Base Frame
    ✅ Capacity: 225 Kg., 350 Kg., 500 Kg., 750Kg., 1000Kg., 1500Kg.(250 Gsm)
    Complete Stainless Steel Body.
    Heavy-duty brake drum.
    Heavy duty differential Gear unit.
    A.C. Frequency Drive.
    ✅ Stainless Steel Cladded Main Roll
    ✅ Circulation System with 2.0 H.P.

    In conclusion, This is best for small batches to mass dyeing lots with the durable built of Stainless Steel it gives durability instead of the lower model. The water re-circulation system makes accurate dyeing results while keeping the fabric clean. Heavy-duty brake drums give precise tension to the cloth with the help of an A.C. Frequency drive.

    In short, It is the basic necessity for a small dyeing house to a large dyeing industry with less space and higher capacity. It is the Best Fabric Dyeing machine for small to medium size cotton dyeing units.

     

    SKU: jigger
Share on Social Media
Open chat