cotton dyeing machine
Showing all 2 results
- Dyeing Machinery
Automatic Jigger
Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER is a Hybrid of hydraulic & conventional JIGGER.
Automatic JIGGER comes with two types 1st one is OPEN TYPE & other one is CLOSE TYPE.
Where One-hand OPEN TYPE Automatic JIGGER comes with all the benefits like
✅ Auto tension control
✅ Auto speed control
✅ Auto cycle control
✅ Circulation system with filters to avoid centre to selvedge
✅ Suitable for any exhaust pre-treatment, dyeing & finish process
✅ Tension setting device to avoid running crease & machine jerks
⭕ Auto pendulum control (optional)
⭕ Batching or winch device (optional)
⭕ Auto water level controller (optional)
⭕ Pneumatic operated drain (optional)Otherhand CLOSE TYPE Automatic JIGGER comes with the additional features like
✅ Auto circulation system
✅ Auto temperature controller
✅ A fully covered jigger will save utilities
⭕ Dosing side tank facility (optional)
⭕ Circulation system with filters to avoid centre to narrow border (optional)The tension control system allows Automatic JIGGER to dye any fabric with ease. One operator can run four Automatic JIGGER machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric.
Automatic JIGGER uses both rollers powered by separate gearboxes and motors on inverter drives which do wonders for uniform dyes, even when running at varying speeds.
In conclusion, it is the best-woven dyeing machine, fabric dyeing machine or Cotton dyeing machine.
🔶 Technical Specification
✅ Capacity: 300 Kg. to 2000 kg. [OPEN]
✅ Capacity: 500 Kg. to 2000 kg. [CLOSE]
✅ Available Width: 1250mm to 3400mm
✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
✅ 0 to 10 Kgs. (Tension less operation Possible)
✅ Suitable for any Fabric from 30gsm to 500gsm
✅ S.S. Cladded Main Roll
✅ Pneumatic cylinders operated doors [CLOSE]
✅ Individual drive on each roller
✅Speed & tension control through a driveSKU: D/AJ-1 - Dyeing Machinery
CP Dyeing
CP Dyeing
CP Dyeing is dyeing machinery to Dye Fabrics rapidly. Dye Fabric. This machine has the following features.
- First, it dyes the cloth with reactive colours. The CP Dyeing is installed with a small vat & shaped to allow fabrics an adequate contact time for absorbing dye bath through the high speed of cloth.
- In other words, CP Dyeing dyes the cloth rapidly, with less place required.
- Secondly, Reduced liquor volume is possible due to the fast exchange of fluid. Therefore, less wastage of resources.
- Thirdly, CP Dyeing‘s Roller width can be made from 1200mm to 3000mm depending on the client’s need.
🔶 Special Features:
✅ Versatile because it is equally suitable for Light and Heavy fabrics.
✅ Utilising of “Two Nip Two Dip” method ensures consistent colour penetration.
✅ The Top rubber roller is anti-deflecting construction.
✅ On Nips, pneumatic loading can be as much as 6 tons.
✅ Minimum loss of dye liquor because of low Dye liquor content in the trough.
✅ The main Batcher can batch cloth up to 1500mm Dia.
✅ Drive to both padder & Batcher by inverter-controlled AC Drive.
✅ Minimum tension between padder & Batcher is for perfect winding of cloth.
✅ The minimum distance between Padder & Batcher is to avoid oxidation.
✅ Machines are available from 1200mm to 3000mm roller width.SKU: D/CP-1


