Dark Light

Rubber Blanket

(1 customer review)

Rubber Blanket

in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:

  • Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
  • Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
  • Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
  • Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
  • Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.

Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.

🔶 Technical Specification

  • Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
  • Fabric Width: offer current width of 1200mm to 3500mm.
  • Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
  • Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
  • Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
  • The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
  • Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage. 

Compressive Shrinking RangeComfit Machine

In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.

 


 

 

 

 

250,000.00

Rubber Blanket

in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:

  • Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
  • Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
  • Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
  • Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
  • Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.

Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.

🔶 Technical Specification

  • Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
  • Fabric Width: offer current width of 1200mm to 3500mm.
  • Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
  • Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
  • Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
  • The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
  • Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage. 

In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Controlled Compressive Shrinking Range.

🔶 Payment, Taxes and Delivery

Payment: Before dispatch of machinery, 40% advance and a balance against the proforma invoice.
Delivery: Delivery of machine ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales TaxGST 18% (Domestic Orders) Or Vat 4% +1% No CST against form “H”( export orders).
Installation: Will be charged extra per machine over and above the price.


 

  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.


 

Rubber Blanket | Accessories | No.1 Highest Quality Rubber
rubber blanket 2

Rubber Blanket is normally used in the textile finishing process for pre-shrinking fine, lightweight cloth and can also be used for twills, drills, etc.

Product SKU: A/R-1

Product Brand: Indian

Product Currency: INR

Product Price: 250000

Price Valid Until: 2027-12-31

Product In-Stock: PreOrder

Editor's Rating:
5
Machine Type

Zero Zero Shrinking Range, Comfit

Fabric Width

1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm, 2300 mm, 2400 mm, 2500 mm, 2600 mm, 2700 mm, 2800 mm, 2900 mm, 3000 mm, 3100 mm, 3200 mm, 3300 mm, 3400 mm, 3500 mm

Blanket Thickness

50 mm, 55 mm, 60 mm, 65 mm, 71 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rubber Blanket | Accessories | No.1 Highest Quality Rubber
rubber blanket 2

Rubber Blanket is normally used in the textile finishing process for pre-shrinking fine, lightweight cloth and can also be used for twills, drills, etc.

Product SKU: A/R-1

Product Brand: Indian

Product Currency: INR

Product Price: 250000

Price Valid Until: 2027-12-31

Product In-Stock: PreOrder

Editor's Rating:
5

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Anuj

    Using for a long time even gave a repeat order.

    Anuj

  • Denim Finishing Range

    0 out of 5
    (0)

    Denim Finishing Range

    The Denim Finishing Range Exclusive purpose is to ensure that the garment made from such fabric does not shrink after the wash hence perfect dimensional stability.

    As per standard, + / -1 % residual shrinkage is acceptable. Denim Finishing Range is available for up to  3600mm working width fabric to assure total shrinkage protection to Denim fabrics. 

    Denim Finishing Range was developed in a way that can shrinkage up to 14% in a single passage.

    Denim Finishing Range is usually the last process in the sequence of fabric finishing. The Denim fabric processed in Denim Finishing Range gets fully shrunk.

    Before Denim Finishing Range, it is advisable to establish the width at which the cloth should get shrunk in length to meet the requirement of the garment makers. It is the best Fabric Finishing machinery.

    🔸 Key Features:

    ✅ Ensuring Required Shrinkage of 14 Ounce Denim in Single RUN At a Speed of 40 to 50 Mtrs / Min.
    ✅ Matching all parameters of Shrinkage, Feel, Warp & Weft Tension.
    ✅ Complete Machine with P.L.C. Controlled Inverter Drive.
    ✅ Large Touch Screen, Showing Shrinkage, Speed and Other Data, Minimum Usage, of Steam & Power.
    ✅ User-friendly machine with the shortest Payback time.
    ✅ Can finish lycra fabrics in a single run with required weft and warp shrinkage at the speed of 40 mt / min.
    ✅ Specially designed heavy warp pull to control the width of the fabric and warp stretch control by P L C.
    ✅ Motorized antiskew device to control the skew setting of fabric twill by forwarding and reversing the movement of motors.
    ✅ Specially developed a shrinking unit to achieve shrinkage up to 14 % depending upon the quality of the fabric with residual shrinkage of 1 %.
    ✅ 2500mm dia Mirror polished Jacketed main palmer cylinder with rotary joints.
    ✅ The number of 2 cooling cylinders is provided at the exit of the palmer unit to cool down the fabrics.
    ⭕ Singing unit at the feeding side. (Optional)
    ⭕ Brushing unit at feeding side. (Optional)
    ⭕ Temperature controlling of shrinkage and palmer unit by PLC. (Optional)
    ⭕ Big Batching device with ‘J’ scray at plating side. (Optional)

     

    SKU: F/DFR-1
  • Jigger

    0 out of 5
    (0)

    Fabric dyeing machines can come in all shapes and sizes, but

    Jigger is typically an open-framed machine with a rotating drum that holds the fabric to be dyed. Jigger is the standard and oldest way to dye cotton and cotton blend fabric.

    The jigger machine has been used for a long time to treat small to medium size lots of woven fabric with an open-width exhaust dyeing process. Dye jiggers are available in Two variants 1st Jigger is an Open type with the following options:

    ✅ Fully S.S. construction or Mounted on C.I. Walls.
    ✅ With a water re-circulation system and temperature controllers.
    ✅ A.C. Motor drive or Inverter Control Drive
    ✅ Semi Automatic or Fully Automatic
    S.S. Cladded Batch Rollers of Ebonite coated Batch Rollers

    2nd one is a Close type with the following advancement:


    ✅ Gear Box Type Semi Automatic Maxi Jigger Machine
    S.S. Spring Type Floating Device
    ✅ Roof Heating is Provided to Prevent Dropping on Fabrics
    ✅ Direct & Indirect Heating with Temperature Controller
    ✅ Auto R/F System with Cycle Contrail with the help of PLC
    ⭕ Pneumatic Operated Auto Drain (Optional)
    ⭕ A Direct Mounted Reduction Gear Box (Optional)

    🔸 Technical Specification

    The Machines are available from 1250mm to 3400mm in width
    ✅ Roll Center: 25″, 31″, 36″, 41″
    Complete Stainless Steel Body with M.S. Base Frame
    ✅ Capacity: 225 Kg., 350 Kg., 500 Kg., 750Kg., 1000Kg., 1500Kg.(250 Gsm)
    Complete Stainless Steel Body.
    Heavy-duty brake drum.
    Heavy duty differential Gear unit.
    A.C. Frequency Drive.
    ✅ Stainless Steel Cladded Main Roll
    ✅ Circulation System with 2.0 H.P.

    In conclusion, This is best for small batches to mass dyeing lots with the durable built of Stainless Steel it gives durability instead of the lower model. The water re-circulation system makes accurate dyeing results while keeping the fabric clean. Heavy-duty brake drums give precise tension to the cloth with the help of an A.C. Frequency drive.

    In short, It is the basic necessity for a small dyeing house to a large dyeing industry with less space and higher capacity. It is the Best Fabric Dyeing machine for small to medium size cotton dyeing units.

     

    SKU: jigger
  • HT.HP. Soft Over Flow

    0 out of 5
    (0)

    HTHP Soft Over Flow is just like the HTHP Soft Flow machine with a bigger capacity & for heavy fabrics.

    HTHP Soft Over Flow is Specially Designed to process Heavy and sensitive fabrics like Terry Towel, and Curtain Bedsheet of 100% Cotton knit and woven fabrics. In short, it’s a Terry towel dyeing machine.

    HTHP Soft Over Flow can work as a Soft Overflow with minor adjustments.

    A larger nozzle diameter, with a Higher volume & low-pressure nozzle design and inside Teflon sheet are helpful to move the fabric very smoothly and gently without damaging the cloth.

    A specially develop online filter design helps to collect the Terry towel fumes.

    🔸 Technical Specification

    ✅ Capacity: 50 to 2000 kg.
    ✅ The process has a sensitive fabric like Terry Towels, Curtain, Bed Sheet, 100% cotton knit & woven etc.
    ✅ Work as Soft flow or as overflow dyeing.
    ✅ High Temp. – Up to 140 ° C.
    ✅ The vessel makes of stainless steel 316 L.
    ✅ Specially developed a filter to collect towel fumes.
    ✅ Teflon Sheet inside the chamber for smooth fabric movement.
    ✅ High volume, Low-pressure soft nozzle with a larger diameter for heavy and Larger width fabrics
    ✅ Fabric drive reel with frequency controller.


     

    SKU: D/HSO-1
  • ,

    Burner 550 – Stage 3

    0 out of 5
    (0)

    Burner 550 | Heating solution

    This heating solution burner 550 comes to volume, potential, and cost efficiency. The Burner 550 is a series stage 3 covers output ranges under 80mg/kWh. These gas burners were designed with an advanced combusting head which provides consistent combustion even under difficult working conditions.

    The placement of the components inside the burner permits easy and precise regulation and maintenance.

    Benefits
    🔥 Amazingly efficient at burning gas
    🔥 Stable flame no matter what kind of weather you’re dealing with
    🔥 High efficiency (80mg/kWh)
    🔥 Efficient, clean combustion
    🔥 Power is increased without complications
    ✅ Easy to maintain
    ✅ Great energy savings

     

    SKU: n/a
  • HT.HP. Soft flow

    0 out of 5
    (0)

    HTHP Soft flow

    • First and foremost, HTHP Soft Flow Dyeing Machine is suitable for sensitive surface structures and natural fabrics. All fabrics like cotton, wool, viscose, acrylic and blends of jersey, terry towel, velour and nylon.
    • Secondly, HTHP Soft Flow Machine is a contemporary technology that uses a curved nozzle to transfer the cloth smoothly at a high fluid flow. As a result, reduce strain and avoid creases and peeling. 
    • Thirdly, by the new design, HTHP Soft Flow takes the Lowest liquor ratio up to 1:5 (on wet material) instead of the conventional design taking the liquor ratio up to 1:10 (on wet).
    • FourthlyHTHP Soft Flow is made of high-quality steel inside and out, making it rust-resistant.
    • Fifthly, the nozzles inside HTHP Soft Flow come with 316L Quality stainless steel. It gives smooth operation to the cloth.
    • Lastly, HTHP Soft Flow includes numerous safety features. 

    In conclusion, it is perfect for modern textile dyeing plants. 

    🔸 Technical Specification

    ✅ Lowest liquor ratio up to 1:5 (wet Fabric)
    ✅ Capacity: 50 to 2000 kg.
    ✅ Dye –30 To 500 Grms/Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
    ✅ High Temp. – Up to 140° C.
    ✅ The vessel builds from stainless steel SS 316L Quality.

    ➡ Online filter for easy clean-up even during the process with an extra filter mesh.
    ➡ For smooth fabric circulation, a Teflon Sheet is inside the chamber.
    ➡ Cup type very soft nozzle with low pressure & higher volume design.
    The fabric driving reel comes with a frequency controller. 


     

    SKU: D/HSF-1