Dark Light
,

Burner 550 – Stage 3


Burner 550 | Heating solution

This heating solution burner 550 comes to volume, potential, and cost efficiency. The Burner 550 is a series stage 3 covers output ranges under 80mg/kWh. These gas burners were designed with an advanced combusting head which provides consistent combustion even under difficult working conditions.

The placement of the components inside the burner permits easy and precise regulation and maintenance.

Benefits
🔥 Amazingly efficient at burning gas
🔥 Stable flame no matter what kind of weather you’re dealing with
🔥 High efficiency (80mg/kWh)
🔥 Efficient, clean combustion
🔥 Power is increased without complications
✅ Easy to maintain
✅ Great energy savings

95,000.00

Compare

This heating solution burner 550 comes to volume, potential, and cost efficiency. The Burner 550 is a series stage 3 covers output ranges under 80mg/kWh. These gas burners were designed with an advanced combusting head which provides consistent combustion even under difficult working conditions.

The placement of the components inside the burner permits easy and precise regulation and maintenance.

Benefits
🔥 Amazingly efficient at burning gas
🔥 Stable flame no matter what kind of weather you’re dealing with
🔥 High efficiency (80mg/Kwh)
🔥 Efficient, clean combustion
🔥 Power is increased without complications

✅ Easy to maintain
✅ Great energy savings

  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.

SKU: N/A Categories: ,
Max Capacity

280kW, 350kW, 400kW, 550kW

 

 

 

 

 

 

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Burner 550 – Stage 3”

There are no reviews yet.

  • Atmospheric Soft Over Flow

    0 out of 5
    (0)

    Atmospheric Soft flow

    The Atmospheric Soft Flow machine is the same as HTHP Soft flow Dyeing machine. The only difference is Atmospheric Soft Flow works at low temperatures & without pressure.

    Some fabrics like Cotton & Cotton blends don’t require high temperatures. In that case, Soft Flow is very much suitable because Atmospheric Soft Flow reduces the running cost by saving energy. In short, it is a Cotton dyeing machine.

    Furthermore, the liquor ratio of the Soft Flow machine is lower than that of the HTHP Soft Flow machine.

     🔸 Technical Specification

    ✅ Lowest liquor ratio up to 1:4 (wet Fabric)
    ✅ Capacity: 50 to 1200 kg.
    ✅ Dye –30 To 500 Grms/Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
    ✅ Maximum Temprature – Up to 98° C.
    ✅ The vessel builds from stainless steel SS 316L Quality.

    ➡ Online filter for easy clean-up even during the process with an extra filter mesh.
    ➡ For smooth fabric circulation, a Teflon Sheet is inside the chamber.
    ➡ Cup type very soft nozzle with low pressure & higher volume design.
    ➡ The fabric driving reel comes with a frequency controller.


     

    SKU: D/ASF-1
  • ,

    Gas Boiler

    0 out of 5
    (0)

    GAS Boiler 

    The Gas Boiler is a packaged three-pass smoke tube with a total wet back boiler. Gas Boiler comes in two three series for burning light oils & gas and heavy oils. 

    The Gas Boiler also can be customized to a complete skid mount unit on customer demand.

    When fitted with a particular burner, these boilers are ideal for burning waste gases like biogas from the decomposition of organic matter in distilleries.

    🔸 PRODUCTS FEATURES:

    ✅ Three-pass smoke tube with complete wet back boiler.
    ⭕ Multi-fuel option – light oils/heavy oils/gases
    ✅ High efficiency of about 88% to 95%
    ✅ High dryness fraction steam increases usable heat.
    ✅ Gas Boiler Comes with mono-block/ dual block/steam atomized burner with world-renowned Technology from (ITALY)
    ⭕ An additional option of oil pre-heater confirming EN safety standards
    ✅Corrugated furnaces for boilers above
     6 TPH capacity.
    ⭕ Optional PLC-based control panels that would be linked to SCADA or DCS systems.

     

    🔸 Operating Range:  

    ➡ Capacities In the range of 1.0 TPH to 15 TPH
    ➡ Pressure: In the range of 10.54 to 17.54 Kg/cm2 (g)
    ➡ Firing fuels: LDO, FO, LSHS & Natural Gas 
    ➡ Efficiency: Overall efficiency of 88 % (+/-2%) on NCV


    SKU: H/GB-1
  • A Frame

    0 out of 5
    (0)

    A-FRAME Trolley

    A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.

    A-frame trolleys are also Utilised in rotating stations by simply adding an extension to them.

    A-frame trolleys come in different sizes from 44 to 130 inches roller width depending on the customer. A-frame trolleys take less space than bucket/box-type trolleys. It gets easier to manage them and store them in one place.

    Inshot A-Frame Tolleys are best to manage and store the grey to finished material in a clean and sorted way that helps to identify the fabric lot.

    Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.

    Wider A Frame Trolley

    🔸 Technical Specification

    ✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).

    ✅ The end shaft is RIB constructed or As per the buyer’s suggestion.

    ⭕ Cladding of S.S. Sheet on a batch roll. (Optional)

    ✅ The front side pooling system is a swivel-type M.S. fabricated bracket with 10″ x 2 wheels.

    ✅ The rare side is of fixed type 12″ x 3″ wheel.

    ✅ Batch coupling is fit on a batch roll for rotating.

    ✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.


     

    SKU: A/T-1
  • Open Width Washing Range

    0 out of 5
    (0)

    Open width Washing Range

    Open width Washing Range is for the fabric washing machine for woven fabrics. The Open width Washing Range machine has the following features.

    • Firstly, The system consists of a specially shaped impeller in the drum in which water jets uniformly smashes the full fabric width very high washing performance on the upper and backside of the fabric.
    • In other words, Open width Washing Range removes unfixed dyestuff, gum, and other chemicals from the fabric.
    • Secondly, Washing with tanks can carry out pre-washing, rinsing, and chemical treatment.
    • Therefore, Open width Washing Range improves fabric quality.
    • An effective squeezer between the washing unit gives maximum liquor separation from one bath to another.
    • Thirdly, Each washing compartment with its force-spray system, re-circulation pump, filtering device, overflow, drain, and heating arrangement.
    • Fourthlythe Open width Washing Range’s working width is to be made from 1500mm to 3500mm depending on the client’s need.
    • Fifthly, ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabric can be processed on this machine.
    • Sixth and most Important is Perfect synchronizing of linear speed hence tension-less and creaseless transport of fabric all along the process.

    🔶 ADVANTAGES :

    ✅ Excellent Washing efficiency.
    ✅ Extremely sturdy construction.
    ✅ Quiet running.
    ✅ Low energy consumption.
    ✅ Ease of operation.
    ✅ Optional knife spray between each strand of fabric with supply from a separate pump.
    ✅ Circulation and counter flow arrangement to save water.
    ✅ Low maintenance.
    ✅ Quick and simple installation.
    ✅ Tight closing glass windows on the sides to provide easy access.
    ✅ Direct steam heating by perforated S S Pipes.
    ✅ S S bottom rolls running in self-aligning bush bearing.

     

    SKU: n/a
  • Relax dryer

    0 out of 5
    (0)

    The Relax Dryer is the finishing machine to dry hosiery fabric after the fabric has been washed or processed. This Relax Dryer has the following features in it.

    • Firstly, The air movement produces undulations in the cloth & at the same time, it expands the knitted fabric causing dimensional shrinkage and selvedge opening.
    • In other wordsRelax Dryer expands the fabric width while drying it.
    • Secondly, Relax Dryer rolls ladder-proof fabrics based on well-known the principle of air impact drying system.
    • Thirdly,  the cloth moved through the drying chamber on a conveyor belt that overfed to increase length shrinkage. 
    • Fourthly, The operating width of the Relax Dryer can range from 1600mm to 4200mm. Depending on the specific needs of the client. 
    • FifthlyRelax Dryer can process fabric ranging from 70 to 700 gsm/meter square of hosiery. 
    • Sixth and most Important, velocity can be achieved up to 60 meters per minute while performing the process.

    In conclusion, Relax Dryer is best suitable for Dyeing & Printing units.

    🔸 Technical Specification

    The number of chambers: 2 to 8.
    Conveyor belt width: 1600mm to 4200mm.
    Heating system alternatives: Natural Gas, LPG, Steam or Thermic Oil.
    Mechanical belt speed: Step less than 0 to 60m/min.
    Maximum working temperature: 220 °C.
    Blowers: Special design, highly efficient, diagonal location, two blowers in each chamber.
    Fabric feeding: Step-less by multiple points.
    Conveyor belt direction control: Electro-pneumatic from both sides.

     

    SKU: RD001
  • Polymeriser

    0 out of 5
    (0)

    Polymeriser

    Polymeriser is to use for fixing printed garments. Polymeriser is an Important part of Processing machinery cause it secures the colour before the washing and finishing. There are the following features in it.

    • Firstly, Polymeriser assures perfect fixation of dyes even at higher temperatures. In other words, the Dyes can be permanent before starting the washing and finishing process of the cloth.
    • Secondly, It is most suitable for curing Phthalein dye, Pigments, and resin set.
    • Thirdly, Pre-dryer removes gaseous fumes from printed fabrics – an exclusive speciality of this Machine. The Machine operates efficiently in the temperature range from 30ºC Temperature to 180ºC and ensures automatic regulation of temperatures within the chamber.
    • Fourthly, the width can be made from 1600mm to 3200mm as per the client’s need.
    • Fifthly, Garment weighted from 70 to 700 gsm/per meter square can be processed.
    • The sixth and most Importantly speed can be achieved up to 40 meters per minute while performing the process.

    In conclusion, Polymeriser is best suitable for the garment industry or dyeing & printing plants.

    🔸 ADVANTAGES :

    ➡ Supply with hot air jets, recirculating fans and steam or thermic oil heating for best curing result.
    ➡ Separate blowers for top and bottom air nozzles.
    ➡ Its uniformity in temperature, width-wise, length and diagonally.
    ➡ No dropping by condensation.
    ➡ Variable speed up to 40 meters per minute by A.C. Inverter System.
    ➡ It is available in 60 to 150 meters of cloth content curing zone.


     

    SKU: P001
Open chat