Dark Light

Stenter


The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.

Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.

It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.

Stenter comes with the following advance and improved features:

🔶  Higher Production Speeds

✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency

✅ Double-jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance

✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.

As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.


3,000,000.00

Stenter

The Stenter is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities to give the fabric the final result of all the processes it went through. Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out. Stenter also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.
Stenter comes with the following advance and improved features:

🔶  Higher Production Speeds
✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency
✅ Double jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance
✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advance chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.
As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.


  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5
SKU: S001 Category: Tags: ,
Fabric

Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar

Fabric Width

1600mm, 1800mm, 2400mm, 2600mm, 2800mm, 3000mm, 3200mm, 3400mm

Chambers

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5

Youtube

Coming Soon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Stenter”

There are no reviews yet.

  • Rope Washing Range

    0 out of 5
    (0)

    Rope Washing Range 

    Rope Washing Range is a fabric washing machine. Therefore, The Rope Washing Range is for woven fabrics like cotton, cotton/viscose, cotton/polyester or linen and knitted fabrics.

    Viscose washed in rope form because of its poor wet strength. 

    Similarly, Knit fabrics tend to elongate in open form and require many holding gadgets. So, it is washed in rope form to avoid curling and elongation. 

    The Rope Washing Rang has two open-width compartments/triple drum compartment/cage washer for wetting and swelling dyes as well gum paste, fabric then gathered in a J-scray before going into the winch washing compartments. 

    The oval-type S.S. winch helps in thrashing the cloth into the S.S. washing tank to remove the gum and excessive colour.

    There is a provision for heating the water with steam for faster removal of excessive materials. Long dwell times, controlled temperature and liquor flow to suit individual requirements add high washing efficiency.

    Each tank can hold 110 kilos to 200 kilogrammes of cloth, depending on the breadth of the tank. After being washed with a rope opening mechanism, the fabric takes on an open state. 

    🔶 ADVANTAGES :

    ✅ Excellent washing efficiency.
    ✅ Sturdy construction.
    ✅ Low energy consumption.
    ✅ Quiet running.
    ✅ Lowest maintenance effort.
    ✅ Speed up to 70 Meters / Min.
    ✅ Easy installation

     

    SKU: n/a
  • Regular Jet

    0 out of 5
    (0)

    Regular Jet dyeing

    This machine is best for polyester fabric dyeing cause it runs on a high pressure of high-temperature water. Regular Jet dyeing is economical because the low liquor ratio reduces everything.

    The fabric inside this polyester dyeing machine moves solely due to the force of water. 

    It is user-friendly because, If we compare it with a Long tube dyeing machine. Four valves are necessary to control the fabric’s motion. Here in Regular Jet dyeing, there is only one valve.

    Absent of reel, reduce connecting electric power, maintenance of two mechanical seals and breakdown time if Jet pressure and reel speed are not synchronized.

    Nearly 4000 without fabric drive reel devices are saving energy and lowering pollution in 20 countries.

    🔸 Technical Specification

    ✅ Capacity: 25 to 400Kg.(Single Tube)
    ✅Ultra Low Liquor Ratio – 1:1 (Wet Fabric)
    ✅ Dye – 30 To 450 Grms./Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
    ✅ High Temp. – Up to 140 ° C.
    ✅ Fabric Speed – 300 Mtr./Min.
    ✅ Vessel: SS 316 L

    Best Polyester dyeing machine with a low liquor ratio in a Jet dyeing form.

     

    SKU: D/JD-1
  • CP Dyeing

    0 out of 5
    (0)

    CP Dyeing

    CP Dyeing is dyeing machinery to Dye Fabrics rapidly. Dye Fabric. This machine has the following features.

    • First, it dyes the cloth with reactive colours. The CP Dyeing is installed with a small vat & shaped to allow fabrics an adequate contact time for absorbing dye bath through the high speed of cloth.
    • In other words, CP Dyeing dyes the cloth rapidly, with less place required.
    • Secondly, Reduced liquor volume is possible due to the fast exchange of fluid. Therefore, less wastage of resources.
    • ThirdlyCP Dyeing‘s Roller width can be made from 1200mm to 3000mm depending on the client’s need.

    🔶 Special Features:

    ✅ Versatile because it is equally suitable for Light and Heavy fabrics.
    ✅ Utilising of “Two Nip Two Dip” method ensures consistent colour penetration.
    ✅ The Top rubber roller is anti-deflecting construction.
    ✅ On Nips, pneumatic loading can be as much as 6 tons.
    ✅ Minimum loss of dye liquor because of low Dye liquor content in the trough.
    ✅ The main Batcher can batch cloth up to 1500mm Dia.
    ✅ Drive to both padder & Batcher by inverter-controlled AC Drive.
    ✅ Minimum tension between padder & Batcher is for perfect winding of cloth.
    ✅ The minimum distance between Padder & Batcher is to avoid oxidation.
    ✅ Machines are available from 1200mm to 3000mm roller width.

     

     

    SKU: n/a
  • A Frame

    0 out of 5
    (0)

    A-FRAME Trolley

    A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.

    A-frame trolleys are also Utilised in rotating stations by simply adding an extension to them.

    A-frame trolleys come in different sizes from 44 to 130 inches roller width depending on the customer. A-frame trolleys take less space than bucket/box-type trolleys. It gets easier to manage them and store them in one place.

    Inshot A-Frame Tolleys are best to manage and store the grey to finished material in a clean and sorted way that helps to identify the fabric lot.

    Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.

    Wider A Frame Trolley

    🔸 Technical Specification

    ✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).

    ✅ The end shaft is RIB constructed or As per the buyer’s suggestion.

    ⭕ Cladding of S.S. Sheet on a batch roll. (Optional)

    ✅ The front side pooling system is a swivel-type M.S. fabricated bracket with 10″ x 2 wheels.

    ✅ The rare side is of fixed type 12″ x 3″ wheel.

    ✅ Batch coupling is fit on a batch roll for rotating.

    ✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.


     

    SKU: A/T-1
  • Rubber Blanket

    (1)

    Rubber Blanket

    in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:

    • Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
    • Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
    • Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
    • Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
    • Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.

    Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.

    🔶 Technical Specification

    • Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
    • Fabric Width: offer current width of 1200mm to 3500mm.
    • Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
    • Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
    • Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
    • The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
    • Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage. 

    Compressive Shrinking RangeComfit Machine

    In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.

     


     

     

     

     

    SKU: n/a