Dark Light

Stenter


The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.

Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.

It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.

Stenter comes with the following advance and improved features:

🔶  Higher Production Speeds

✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency

✅ Double-jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance

✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.

As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.


3,000,000.00

Stenter

The Stenter is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities to give the fabric the final result of all the processes it went through. Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out. Stenter also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.
Stenter comes with the following advance and improved features:

🔶  Higher Production Speeds
✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency
✅ Double jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance
✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advance chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.
As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.


  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5
SKU: S001 Category: Tags: ,
Fabric

Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar

Fabric Width

1600mm, 1800mm, 2400mm, 2600mm, 2800mm, 3000mm, 3200mm, 3400mm

Chambers

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5

Youtube

Coming Soon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Stenter”

There are no reviews yet.

  • Chainless Merceriser

    0 out of 5
    (0)

    Chainless Merceriser

    The Chainless Merceriser is the most Significant procedure for the cloth. Chainless Merceriser machine there are following features in it.

    • To begin with, Chainless Merceriser is one of the most fundamental steps for finishing cotton fabrics. Merceriser involves treating organic material with high-caustic soda solutions. In other words, it eliminates impurities or undesired particles from the cloth before completing other processes. 
    • Secondly, It rolls cloth on batching trolley from fold/loose form by pressure roll assisted with twin – Pneumatic Cylinders, AC Motor & Gearbox.
    • Thirdly, The caustic soda-impregnated Fiber reflects light, making it brighter. It also boosts hygroscopicity, strength, and dye affinity. 
    • Fourthly, The operating width of a chainless merceriser can range from 1500mm to 3500 mm, as preferred by the customer.
    • Fifthly, It can process woven fabrics with capacities ranging from 70 to 700 grammes per square metre
    • Lastly, It is available in various sizes and speeds ranging from 8 to 40 metres per minute.
    In conclusion, this merceriser machine is best suitable for the garment industry Dyeing & printing plants.

    🔸 ADVANTAGES :

    ➡ Increase dye Affinity
    ➡ Improve Luster
    ➡ Add more Tensile Strength
    ➡ Increase Dimensional Stability of Warp & Weft yarn.
    ➡ Elimination of immature or Dead Cotton
    ➡ Improved Handling effects.
    ➡ Tailored to the customer’s specifications.


     

     

    SKU: P/CM-1
  • A Frame

    0 out of 5
    (0)

    A-FRAME Trolley

    A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.

    A-frame trolleys are also Utilised in rotating stations by simply adding an extension to them.

    A-frame trolleys come in different sizes from 44 to 130 inches roller width depending on the customer. A-frame trolleys take less space than bucket/box-type trolleys. It gets easier to manage them and store them in one place.

    Inshot A-Frame Tolleys are best to manage and store the grey to finished material in a clean and sorted way that helps to identify the fabric lot.

    Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.

    Wider A Frame Trolley

    🔸 Technical Specification

    ✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).

    ✅ The end shaft is RIB constructed or As per the buyer’s suggestion.

    ⭕ Cladding of S.S. Sheet on a batch roll. (Optional)

    ✅ The front side pooling system is a swivel-type M.S. fabricated bracket with 10″ x 2 wheels.

    ✅ The rare side is of fixed type 12″ x 3″ wheel.

    ✅ Batch coupling is fit on a batch roll for rotating.

    ✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.


     

    SKU: A/T-1
  • Loop Ager

    0 out of 5
    (0)

    Loop Ager

    Loop Ager can be offered in five variants as mentioned below:

    1. DIGIFIX Specially designed Machine for Digital Printing
    2. ATMOFIX suitable for Low-Temperature Application
    3. EVOMAX suitable for High-Temperature Applications
    4. RAPIFIX suitable for Hot Air and Pigment Application
    5. UNIFIX is appropriate for both Low Temperature & High-Temperature applications

    Loop agers are simple to use on almost any fabric that has been printed using different printing recipes. The high versatility of steam agers, together with high qualitative standards, allows their utilization in all continuous production lines for the colour fixation processes.

    ❇ ATMOFIX Loop Agers, the quantity of steam is injected more at the entry of the fabric as on the first few loops.

    Moisture condenses on the cloth with the Exothermic reaction for colour fixation. UREA dissociation takes place in the initial few seconds By when the water vapour is distributed/injected into the chamber accordingly.

    ❇ EVOMAX Loop Agers are suitable for high-temperature streaming applications.

    The Steam consumption is comparatively less because of the compact design of chambers manufactured by SS 316 with larger Thermos Oil Radiators/ Heaters/Gas Burners installed to heat the section faster when processing with High-Temperature steaming applications or Hot Air applications.

    ❇ RAPIFIX  Loop Agers are robust and suitable for any working atmosphere. Curing Machines constructed of Mild Steel on the inside with an outer body made of Insulating Panels are fit for this process because the required temperature is above 130°C & the machine operates in moisture-free conditions on the inside.

    Essentially, the Dyes are set to the cloth during the Curing Process by polymerization in hot air at 150°C to 160°C. 

    Loop Agers fabric moves in tensionless conditions. So, there are no chances for lengthwise stretching and no rubbing effect on the cloth.
    In any ageing machine, the transportation of the fabric in the hanging loop form makes the fabric move in a tensionless motion.

    Oil radiators & centrifugal blowers are provided which help circulation Of the surrounding air through the filters & blows it into the machine from the bottom part of the machine.

    An exhaust fan removes the Hydrocarbons & Condensed Oil.

     

    🔸 Key features of the Loop Ager Machine:

    1. Compact steaming chamber design to reduce steam consumption.

    2. Even the distribution of steam in the chamber, steam injected from the top & lighter than the air will force to remove air and exhaust from the bottom will be occupied in the process chamber fully make it leaving no chance of air inside the steaming compartment.

    3. Optimum steam conditioning and humidification with parallel flow inside the steamer.

    4. Conveyor rollers treated with shot blasting that rotates on their axis to prevent marking off from the rod itself.

    5. A loop rod roller mechanism is used to create loops.

    6. The steaming chamber is a closed type made of stainless steel.

    7. For low-temperature steaming of the chamber roof and entry, the delivery slit is heated by steam coils preventing condensation and dripping on the fabric.

    8. DIGIFIX, ATMOFIX and UNIFIX Loop Agers are equipped with a special device steam saturator that conditions the steam. It passes through the water before being injected into the steaming chamber.

    These characteristics of steam pre-conditioning help prevent and control the exothermic reaction of the fabric with the printing paste. Making the machine unique & use The temperature control system/moisturising system for the said machines is the basis of the remarkable success achieved in the textile industries for Low-Temperature Applications.

    9. The EVOMAX and UNIFIX Loop Agers are fitted with an effective re-circulation system and heat exchanger using either thermic fluid or direct gas fire system for high-temperature steaming, ensuring uniform temperature throughout the chamber.

    10. A unique system to allow air to re-circulate in our RAPIFIX Loop Ager instead of steam permits Polymerization treatment with stifling air up to 160 ͦC.

    11. Two enormous size access windows are provided on the front side, two small inspection windows on the back side and one small size window on the Drive arrangement platform.

    12. Steam exhaust fan driven by variable speed AC motor, all fabric movements are pushed by variable speed AC motor.

    13. Automatic control PLC system for programming and monitoring steam quantity, steam pressure, processing time & temperature is optional with our “PRO” version of all the variants of Loop Agers and Curing machines.

    14. “LITE” versions of machines are also available for all variants of Agers and Curing machines for Manual operations and are also equipped with Modbus protocol and a 7” HMI for comfortable functions.

     

    SKU: n/a
  • SOFT FEEL Surface Finish

    0 out of 5
    (0)

    SOFT FEEL 

    is a new revolutionary way to create beautiful fabrics.

    In other words, It is value-adding machinery that gives the fabric a soft and smooth finish.

    SOFT FEEL obtains a mix of different grains of abrasive bands and abrasive brushes complete range of SUEDING and BRUSHING.

    Because of increasing demand in domestic and export markets for consistent gentle and soft surface finish.

    We have developed the latest  SOFT FEEL surface finish machine for exceedingly smooth and even surface treatment on dry fabric like suiting, shirting, dress materials and denim.

    SOFT FEEL’s Powerful fluff suction keeps fabric, brush rollers, and the inside area clean and dust-free. Therefore, it helps machinery to be low maintenance.

    SOFT FEEL is committed to producing an infinitely adjustable smooth surface with an outstanding repeat accuracy of the desired effect.

    SOFT FEEL comes with 3 Brush Rolls / 4 Brush Rolls and 6 Brush Rolls according to the client’s needs. 

    SOFT FEEL can process fabric ranging from 70 gsm/meter square to 700 gsm/meter square.

    SOFT FEEL‘s working width is to be made from 1900mm to 2600mm depending on the client’s need.

     

    🔶 ADVANTAGE:

    ➜ Compact Design

    ➜ Clear visibility of the ongoing process.

    ➜ Positively driven scroll roller for ceaseless fabric feeding.

    ➜ Rotating Pressing arrangement.

    ➜ Variable brush speed for required feel.

    ➜ Powerful fluff suction keeps fabric with brush rollers and the inside area

    clean and dust free.

    ➜ Multi point inverter controlled drive ensures controlled fabric tension.

    ➜ Built-in electrical panel.

    ➜ User-friendly Touch Screen display.

    ➜ Plaiting down or optional friction batch.


    Follow/Share/Visit Us on

    [DISPLAY_ULTIMATE_SOCIAL_ICONS]

     

    SKU: WIZ06
  • Multi-Nozzle Soft flow

    0 out of 5
    (0)

    Multi-Nozzle Soft Flow is a Low/High-Temperature dyeing machine technology that works as a “Soft flow” or as a “Jet dyeing” machine.

    The main advantage of this development is to increase the machine’s flexibility and versatility to process all types of fabrics.

    The soft nozzles in this new technological advancement have a large diameter, and the fixed nozzle has an individual flow control valve, whereas the main nozzle is adjustable.

    By increasing and decreasing the gap of a nozzle, flow and pressure increase or decrease as per fabric quality demand.

    To run Multi-Nozzle Soft Flow as a soft flow machine, increase the gap Which, subsequently decreases the pressure and increases water flow,

    At the time, all three nozzles worked as Soft flow & water flow gets controlled individually by the control valve As per fabric quality demand.

    To run The Multi-Nozzle Soft Flow as a “Jet dyeing” Machine lowering the gap of a nozzle which increases the pressure and decreases the water flow. That time close the soft-nozzle control valve.

    🔸 Technical Specification

    ✅ Capacity: 25 to 400 kg. (Single Tube)
    ✅ Ultra Low Liquor Ratio – 1:1 (Wet Fabric)
    Dye –30 To 500 Grms./Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
    High Temp. – Up to 140° C.
    Max. Fabric Speed – 400 Mtr./Min.
    Work as a Jet Dyeing or as Soft flow to meet the requirements of all types of fabric quality.
    Vessel: SS 316 L.
    Multiple soft nozzles.


     

    SKU: D/MSF-1
  • Jigger

    0 out of 5
    (0)

    Fabric dyeing machines can come in all shapes and sizes, but

    Jigger is typically an open-framed machine with a rotating drum that holds the fabric to be dyed. Jigger is the standard and oldest way to dye cotton and cotton blend fabric.

    The jigger machine has been used for a long time to treat small to medium size lots of woven fabric with an open-width exhaust dyeing process. Dye jiggers are available in Two variants 1st Jigger is an Open type with the following options:

    ✅ Fully S.S. construction or Mounted on C.I. Walls.
    ✅ With a water re-circulation system and temperature controllers.
    ✅ A.C. Motor drive or Inverter Control Drive
    ✅ Semi Automatic or Fully Automatic
    S.S. Cladded Batch Rollers of Ebonite coated Batch Rollers

    2nd one is a Close type with the following advancement:


    ✅ Gear Box Type Semi Automatic Maxi Jigger Machine
    S.S. Spring Type Floating Device
    ✅ Roof Heating is Provided to Prevent Dropping on Fabrics
    ✅ Direct & Indirect Heating with Temperature Controller
    ✅ Auto R/F System with Cycle Contrail with the help of PLC
    ⭕ Pneumatic Operated Auto Drain (Optional)
    ⭕ A Direct Mounted Reduction Gear Box (Optional)

    🔸 Technical Specification

    The Machines are available from 1250mm to 3400mm in width
    ✅ Roll Center: 25″, 31″, 36″, 41″
    Complete Stainless Steel Body with M.S. Base Frame
    ✅ Capacity: 225 Kg., 350 Kg., 500 Kg., 750Kg., 1000Kg., 1500Kg.(250 Gsm)
    Complete Stainless Steel Body.
    Heavy-duty brake drum.
    Heavy duty differential Gear unit.
    A.C. Frequency Drive.
    ✅ Stainless Steel Cladded Main Roll
    ✅ Circulation System with 2.0 H.P.

    In conclusion, This is best for small batches to mass dyeing lots with the durable built of Stainless Steel it gives durability instead of the lower model. The water re-circulation system makes accurate dyeing results while keeping the fabric clean. Heavy-duty brake drums give precise tension to the cloth with the help of an A.C. Frequency drive.

    In short, It is the basic necessity for a small dyeing house to a large dyeing industry with less space and higher capacity. It is the Best Fabric Dyeing machine for small to medium size cotton dyeing units.

     

    SKU: jigger