No products in the cart.
Accessories
Rubber Blanket
Rubber Blanket
In the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:
- Firstly, it is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
- Secondly, it ensures a non-stick surface for an excellent fabric finish during the shrinkage process of the textile.
- Thirdly, the high-quality specialty rubber additive with high-performance anti-degradants is selected to prevent surface degradation of it at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
- Fourthly, a Superior quality Rubber can effortlessly be processed at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat-resistant nature of the Rubber, it gives uninterrupted service before stopping the machine from grinding the new smooth surface.
- Fifthly, the good abrasive surface and excellent flex quality of it expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Blanket available in the Indian market.
Moreover, Producers of lightweight, low-shrinkage potential, 100% cotton or cotton/polyester commonly report from 15 million to 20 million meters of productive life.
🔶 Technical Specification
- Hardness: The recommended hardness of the rubber is between 36℃ – 39℃, depending on the fabrics to be processed.
- Fabric Width: offer current width of 1200mm to 3500mm.
- Usually, the rubber blanket should be 150 mm to 200 mm wider than the cloth to be processed.
- Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
- Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require a higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, the Rubber Blanket thickness depends on the required shrinkage in fabrics.
- The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit-type machine 50 mm.
- Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetic dress material, etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. A belt thickness of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage.
In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use machines like Compressive Shrinking Range or Zero Zero & Comfit
₹325,000.00
Rubber Blanket
In the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:
- Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
- Secondly, it ensures a non-stick surface for an excellent fabric finish during the shrinkage process of the textile.
- Thirdly, the high-quality specialty rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
- Fourthly, a Superior quality Rubber blanket can effortlessly be processed at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat-resistant nature of the Rubber Blanket, it gives uninterrupted service before stopping the machine from grinding the new smooth surface.
- Fifthly, the good abrasive surface and excellent flex quality of the Rubber Blanket are expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Blanket available in the Indian market.
Moreover, Producers of lightweight, low-shrinkage potential, 100% cotton or cotton/polyester commonly report from 15 million to 20 million meters of productive life.
🔶 Technical Specification
- Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees, depending on the fabrics to be processed.
- Fabric Width: offer current width of 1200mm to 3500mm.
- Usually, the Rubber Blanket should be 150 mm to 200 mm wider than the cloth to be processed.
- Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
- Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require a higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, the Rubber Blanket thickness depends on the required shrinkage in fabrics.
- The Rubber Blanket has a maximum shrinkage capacity of up to 15% for lightweight fabric processed on a comfit-type machine, 50mm.
- Usually, the Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetic dress material, etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavyweight fabrics like Denim, Twill, Drills, etc. A belt thickness of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage.
In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use machines like Controlled Compressive Shrinking Range.
🔶 Payment, Taxes, and Delivery
Payment: Before dispatch of machinery, 40% advance and a balance against the proforma invoice.
Delivery: Delivery of the machine ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales Tax: GST 18% (Domestic Orders)
Installation: Will be charged extra per machine over and above the price.
1. Select Product
Choose the required specification & submit the details.
2. Get Offer
Get a Detailed Offer.
3. Pay The Advance
Pay the advance amount as per agreed terms.
4. Product Under Construction
Product goes under Construction according agreed time.
5. Pay The Rest Amount
Pay the balance amount as your machine get ready to dispatch.
6. Shipment Initiated
Shipment option available through Manufacturer.
7. Installation
Finally, the product will be installed at your plant.
Rubber Blanket | Accessories | No.1 Highest Quality Rubber
Rubber Blanket is normally used in the textile finishing process for pre-shrinking fine, lightweight cloth and can also be used for twills, drills, etc.
Product SKU: A/R-1
Product Brand: Jio Textile
Product Currency: INR
Product Price: 325000
Price Valid Until: 2027-08-20
Product In-Stock: PreOrder
Editor's Rating:
5
5
| Machine Type | Zero Zero Shrinking Range, Comfit |
|---|---|
| Fabric Width | 1200 mm, 1300 mm, 1400 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm, 2300 mm, 2400 mm, 2500 mm, 2600 mm, 2700 mm, 2800 mm, 2900 mm, 3000 mm, 3100 mm, 3200 mm, 3300 mm, 3400 mm, 3500 mm |
| Blanket Thickness | 50 mm, 55 mm, 60 mm, 65 mm, 71 mm |
Rubber Blanket | Accessories | No.1 Highest Quality Rubber
Rubber Blanket is normally used in the textile finishing process for pre-shrinking fine, lightweight cloth and can also be used for twills, drills, etc.
Product SKU: A/R-1
Product Brand: Jio Textile
Product Currency: INR
Product Price: 325000
Price Valid Until: 2027-08-20
Product In-Stock: PreOrder
Editor's Rating:
5
5
Based on 1 review
Add a review
- Batching, Makeup Machinery
Single Folding Machine
This Single Folding machine or fabric folding machine is one of the fabric makeup machinery which has the following features :
- Firstly, the Single Folding machine does fold the fabric from a loose form to an organized plated state before performing dyeing/printing/processing operations.
- In other words, the fabric needs an inspection before starting any processes.
- Secondly, the Single Folding machine also measures fabric length before any operation or after all processes.
- Thirdly, the Single Folding machine comes in four different sizes from 41″/36 (Small)* to 72″/67 (Large)
- Fourthly, woven fabrics like cotton, viscose, rayon, wool & polyester weigh from 70 to 700 gsm/meter square and fold on a Single Folding machine.
- Fifth and most importantly, the speed can be achieved up to 50 meters per minute while performing the process.
In conclusion, this fabric folding machine is best suitable for the garment industry or dyeing & printing plants.
🔸 Technical Specification
✅ For fabric up to 1700MM
✅ The working table descends up to 15” (380 mm).
✅ Length is of folds adjustable up to 1.00 meter.
✅ Cast Iron sidewalls are closed to make the machine robust and sturdy.
✅ Folding blades mounted on the carriage of steel roller chains.
✅ a simple device for quick and precise folding with knife adjustment
✅ Operating speed: 50 meters/minute.
✅ Drive on motor 2HP x 960RPM.
✅ Stroke-type length Counter with manual setting or ⭕ Digital counter.
SKU: n/a - Dyeing Machinery
Regular Jet
Regular Jet dyeing
This machine is best for polyester fabric dyeing cause it runs on a high pressure of high-temperature water. Regular Jet dyeing is economical because the low liquor ratio reduces everything.
The fabric inside this polyester dyeing machine moves solely due to the force of water.
It is user-friendly because, If we compare it with a Long tube dyeing machine. Four valves are necessary to control the fabric’s motion. Here in Regular Jet dyeing, there is only one valve.
Absent of reel, reduce connecting electric power, maintenance of two mechanical seals and breakdown time if Jet pressure and reel speed are not synchronized.
Nearly 4000 without fabric drive reel devices are saving energy and lowering pollution in 20 countries.
🔸 Technical Specification
✅ Capacity: 25 to 400Kg.(Single Tube)
✅Ultra Low Liquor Ratio – 1:1 (Wet Fabric)
✅ Dye – 30 To 450 Grms./Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ High Temp. – Up to 140 ° C.
✅ Fabric Speed – 300 Mtr./Min.
✅ Vessel: SS 316 LBest Polyester dyeing machine with a low liquor ratio in a Jet dyeing form.
SKU: D/JD-1 - Batching, Makeup Machinery
Wider-width Single Folding
Wider-width Single folding machine is to fold/measure the length of fabric before process and also to measure it after the final process.
Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester. this type of machine works in units which dye, print or process wider width fabric such as curtains, blankets and bedsheets cause most of these type of products has wider width. Length of folds can be adjustable up to 1 meter with table descends up to 380mm.
It comes in four different sizes from 84″/79 (Small)* to 120″/115 (Large)[spbsm-follow-buttons]
SKU: n/a - Dyeing Machinery
Multi-Nozzle Soft flow
Multi-Nozzle Soft Flow is a Low/High-Temperature dyeing machine technology that works as a “Soft flow” or as a “Jet dyeing” machine.
The main advantage of this development is to increase the machine’s flexibility and versatility to process all types of fabrics.
The soft nozzles in this new technological advancement have a large diameter, and the fixed nozzle has an individual flow control valve, whereas the main nozzle is adjustable.
By increasing and decreasing the gap of a nozzle, flow and pressure increase or decrease as per fabric quality demand.
To run Multi-Nozzle Soft Flow as a soft flow machine, increase the gap Which, subsequently decreases the pressure and increases water flow,
At the time, all three nozzles worked as Soft flow & water flow gets controlled individually by the control valve As per fabric quality demand.
To run The Multi-Nozzle Soft Flow as a “Jet dyeing” Machine lowering the gap of a nozzle which increases the pressure and decreases the water flow. That time close the soft-nozzle control valve.
🔸 Technical Specification
✅ Capacity: 25 to 400 kg. (Single Tube)
✅ Ultra Low Liquor Ratio – 1:1 (Wet Fabric)
✅ Dye –30 To 500 Grms./Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ High Temp. – Up to 140° C.
✅ Max. Fabric Speed – 400 Mtr./Min.
✅ Work as a Jet Dyeing or as Soft flow to meet the requirements of all types of fabric quality.
✅ Vessel: SS 316 L.
✅ Multiple soft nozzles.SKU: D/MSF-1 - Dyeing Machinery
HT.HP. Soft Over Flow
HTHP Soft Over Flow is just like the HTHP Soft Flow machine with a bigger capacity & for heavy fabrics.
HTHP Soft Over Flow is Specially Designed to process Heavy and sensitive fabrics like Terry Towel, and Curtain Bedsheet of 100% Cotton knit and woven fabrics. In short, it’s a Terry towel dyeing machine.
HTHP Soft Over Flow can work as a Soft Overflow with minor adjustments.
A larger nozzle diameter, with a Higher volume & low-pressure nozzle design and inside Teflon sheet are helpful to move the fabric very smoothly and gently without damaging the cloth.
A specially develop online filter design helps to collect the Terry towel fumes.
🔸 Technical Specification
✅ Capacity: 50 to 2000 kg.
✅ The process has a sensitive fabric like Terry Towels, Curtain, Bed Sheet, 100% cotton knit & woven etc.
✅ Work as Soft flow or as overflow dyeing.
✅ High Temp. – Up to 140 ° C.
✅ The vessel makes of stainless steel 316 L.
✅ Specially developed a filter to collect towel fumes.
✅ Teflon Sheet inside the chamber for smooth fabric movement.
✅ High volume, Low-pressure soft nozzle with a larger diameter for heavy and Larger width fabrics
✅ Fabric drive reel with frequency controller.SKU: D/HSO-1 - Processing Machinery
Cylinder Drying Range
Drying Range
The Drying Range or VDR (Vertical Drying Range Machine) is one of the most demanding processing machinery in Woven dyeing & printing plants. The Drying Range has the following features that make it an essential part of the plant.
- Firstly, It ensures rapid drying of fabric at high steam pressure.
- In other words, It is suitable for fabric drying, semi-drying, and fabric that doesn’t require heat setting or Clothes which need semi-dry or completely dry.
- Secondly, a Belt drive or individual drive for tensionless and crease-free passage of fabric on the cylinder result in the cloth moving smoothly.
- Thirdly, an Individual trapping system for faster condensate removal inside chambers.
- Therefore, it keeps cylinders at maximum heat.
- Fourthly, the working width options from 1250mm to 3500mm according to the client’s need.
- Fifthly, ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be rolled on this machine.
- Sixthly and most Important Drying Range has the option of 6, 8, 10, 12, 16, 20, or 24 cylinders in a single or double frame.
Above all, more numbers of cylinders equal more speed.
In conclusion, this machine is best suitable for Dyeing and Printing Plants.
🔸 Advantages:
➡ Long Lasting & sturdy construction
➡ Lowest consumption data
➡ Quick heating up
➡ Easy to operate
➡ Drying with minimum tension
➡ Crease-free fabric passage
➡ Perfect temperature uniformity across fabric width
➡ Highest product quality
➡ Shut off valves for cylinders
➡ Lowest maintenance effort
➡ Lowest radial run out and perfect welding craftsmanship
🔸 Technical Specification:
✅ Box type or beam stack structures as per choice.
✅ Belt-driven or individual drive for tension-less and crease-free passage for fabric on cylinders.
✅ Options of 2 bowls or three bowls mangle to attached with cylinder dryer as per customer need.
✅ Any width from 1250mm to 3500mm of the dryer is supplied.
✅ The Drying Range has the option of 6, 8, 10, 12, 16, 20, or 24 cylinders in a single or double frame.
✅ Every/alternate cylinder can have an individual geared motor drive if required.
✅ An Individual trapping system for faster condensate removal from cylinders.
SKU: n/a
Related products
- Accessories
Bag Filter
Bag Filter
A Bag Filter for Boiler and Thermopack, Boiler Bag filter, also known as a dust collector, is a most required Accessory for boiler houses in textile plants and mills. The primary object of the Bag filter is to clean dirty air or gas by trapping dust and particles before the air goes from the chimneys of the Plants and Mills.
The Bag filter consists of multiple woven bags. The bag filter typically holds between 56 and 320 bags, depending on the capacity of the Boiler or Thermopac. These filters effectively capture dust and particles, helping the equipment work efficiently. Their design ensures they fit well with the system while allowing necessary airflow. It has the following features that make it an essential part of Boiler Houses in Textile Plants:
- Firstly, it cleans dirty air and gases by catching them in bags before the air enters the environment.
- Secondly, it helps to contain dirt and pollutants from the air, making the workplace safer for workers and the environment.
- Thirdly, in industries like textiles, even tiny dust particles can affect the quality of the product. Bag filters help maintain a clean environment.
- Fourthly, it is a highly customizable product that can carry between 56 and 320 bags, depending on the capacity of the Boiler or Thermopac.
- Fifth and most importantly, Governments have strict rules on air pollution. Bag filters help companies follow these rules to avoid fines or shutdowns.
Conclusion:
Bag filters are essential for modern industry. They clean the air by removing dust and particles, protecting people and machines. They work efficiently, are built to last, and can be used in different industries, including textile, cement, and food production.
Using bag filters helps industries maintain clean air, comply with environmental laws, and create a safer workplace. They are a wise investment for any company seeking to enhance safety and productivity.
🔸 Technical Specification
✅ Can be customized from 56 to 320 bags.
✅ Attach with Boiler or Thermopac (Thermic Fluid Heater)
✅ From capacity 1 tons to 10 tons (Boiler) & from capacity 500U to 5000U (Thermic Fluid Heater)
SKU: A/BF-1 - Accessories
Roll Wrapping
Roll Wrapping
Fabric Roll wrapping machine is one of the most required Accessories for pre-delivery processes in Textile plants and Mills. The primary object of the fabric roll wrapping machine is to wrap ready-to-ship rolls so that the fabric remains safe while being delivered to the customer.
Fabric Roll wrapping machines can wrap material rolls of Denim Cloth, Curtain Cloth, Carpets, Foam sheets, Upholsteries, Fabrics, Film, Paper etc. which have a Maximum roller height from ground level up to 400 millimetres.
The fabric Roll wrapping machine is simple to operate, and the sturdy & safe control panel makes it easy to load and unload the fabric roll with the ease of integration into conveyor lines.
With a speed of up to 50 meters per minute, making 20 to 40 rolls per hour while performing variable overlap, amount of stretch, and roller speed, the fabric roll wrapping machine saves labour, time and money.
Because of its unique construction, traverse can accommodate a variety of roll widths. Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).
Inshot fabric Roll wrapping/Stretch wrap machines make it possible to wrap, store and protect ready-to-ship rolls while protecting rolls from dirt and damage.
Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.
🔸 Technical Specification
✅ Maximum roller height from ground level up to 400mm can be processed.
✅ Speed up to 50 meters/minute.
✅ Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).
✅ Rolls/Hour: 20-40 rolls.
✅ Weight/Roll: 400kgs
✅ Roll Diameter: 600mm
✅ Roll Width: 2100mm (As Par Fabric width)
SKU: A/WR-1-1 - Accessories
A Frame
A-FRAME Trolley
A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.
A-frame trolleys are also Utilised in rotating stations by simply adding an extension to them.
A-frame trolleys come in different sizes from 44 to 130 inches roller width depending on the customer. A-frame trolleys take less space than bucket/box-type trolleys. It gets easier to manage them and store them in one place.
Inshot A-Frame Tolleys are best to manage and store the grey to finished material in a clean and sorted way that helps to identify the fabric lot.
Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.
🔸 Technical Specification
✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).
✅ The end shaft is RIB constructed or As per the buyer’s suggestion.
⭕ Cladding of S.S. Sheet on a batch roll. (Optional)
✅ The front side pooling system is a swivel-type M.S. fabricated bracket with 10″ x 2 wheels.
✅ The rare side is of fixed type 12″ x 3″ wheel.
✅ Batch coupling is fit on a batch roll for rotating.
✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.
SKU: A/T-1
Anuj –
Using for a long time even gave a repeat order.
Anuj –