Automatic Jigger
Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER is a Hybrid of hydraulic & conventional JIGGER.
Automatic JIGGER comes with two types 1st one is OPEN TYPE & other one is CLOSE TYPE.
Where One-hand OPEN TYPE Automatic JIGGER comes with all the benefits like
✅ Auto tension control
✅ Auto speed control
✅ Auto cycle control
✅ Circulation system with filters to avoid centre to selvedge
✅ Suitable for any exhaust pre-treatment, dyeing & finish process
✅ Tension setting device to avoid running crease & machine jerks
⭕ Auto pendulum control (optional)
⭕ Batching or winch device (optional)
⭕ Auto water level controller (optional)
⭕ Pneumatic operated drain (optional)
Otherhand CLOSE TYPE Automatic JIGGER comes with the additional features like
✅ Auto circulation system
✅ Auto temperature controller
✅ A fully covered jigger will save utilities
⭕ Dosing side tank facility (optional)
⭕ Circulation system with filters to avoid centre to narrow border (optional)
The tension control system allows Automatic JIGGER to dye any fabric with ease. One operator can run four Automatic JIGGER machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric.
Automatic JIGGER uses both rollers powered by separate gearboxes and motors on inverter drives which do wonders for uniform dyes, even when running at varying speeds.
In conclusion, it is the best-woven dyeing machine, fabric dyeing machine or Cotton dyeing machine.
🔶 Technical Specification
✅ Capacity: 300 Kg. to 2000 kg. [OPEN]
✅ Capacity: 500 Kg. to 2000 kg. [CLOSE]
✅ Available Width: 1250mm to 3400mm
✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
✅ 0 to 10 Kgs. (Tension less operation Possible)
✅ Suitable for any Fabric from 30gsm to 500gsm
✅ S.S. Cladded Main Roll
✅ Pneumatic cylinders operated doors [CLOSE]
✅ Individual drive on each roller
✅Speed & tension control through a drive
₹550,000.00
Compare
AUTOMATIC JIGGER
Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER is a Hybrid of hydraulic & conventional JIGGER.
Automatic JIGGER comes with two types 1st one is OPEN TYPE as well 2nd one is CLOSE TYPE.
Where One-hand OPEN TYPE comes with all the benefits like
✅ Auto tension control
✅ Auto speed control
✅ Auto cycle control
✅ Circulation system with filters to avoid centre to selvedge
✅ Suitable for any exhaust pre-treatment, dyeing & finish process
✅ Tension setting device to avoid running crease & machine jerks
⭕ Auto pendulum control (optional)
⭕ Batching or winch device (optional)
⭕ Auto water level controller (optional)
⭕ Pneumatic operated drain (optional)
Otherhand CLOSE TYPE comes with the additional features like
✅ Auto circulation system
✅ Auto temperature controller
✅ A fully covered jigger will save utilities
⭕ Dosing side tank facility (optional)
⭕ Circulation system with filters to avoid centre to the edge (optional)
The tension control system allows dyeing nearly any fabric automatically with ease. One operator can run four machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric.
It uses both rollers sets powered by separate gearboxes and motors on inverter drives which can do wonders for giving uniform dyes, even when running at varying speeds.
🔶 Technical Specification
✅ Capacity: 300 Kg. to 2000Kg. [OPEN]
✅ Capacity: 500 Kg. to 2000Kg. [CLOSE]
✅ Available Width : 1250mm to 3400mm
✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
✅ 0 to 10 Kgs. (Tension less operation
Possible)
✅ Suitable for any Fabric from 30gsm to 500gsm
✅ S.S. Cladded Main Roll
✅ Pneumatic cylinders operated doors [CLOSE]
✅ Individual drive on each roller
✅Speed & tension control through a drive
🔶 Payment, Taxes and Delivery
Payment: Before dispatch of machinery, 40% advance and a balance against the proforma invoice.
Delivery: Delivery of machine ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales Tax: GST 18% (Domestic Orders) Or Vat 4% +1% No CST against form “H”( export orders).
Installation: Will be charged extra per machine over and above the price.
OPEN TYPE
CLOSE TYPE
1. Select Product
Choose the required specification & submit the details.
2. Get Offer
Get a Detailed Offer.
3. Pay The Advance
Pay the advance amount as per agreed terms.
4. Product Under Construction
Product goes under Construction according agreed time.
5. Pay The Rest Amount
Pay the balance amount as your machine get ready to dispatch.
6. Shipment Initiated
Shipment option available through Manufacturer.
7. Installation
Finally, the product will be installed at your plant.
Automatic Jigger | Best Fabric dyeing machine 300-2000 kgs. | Book Online
Automatic jigger is a new fabric dyeing machine or say hybrid version of a simple jigger and hydraulic jigger this jigger can dye all woven fabrics like cotton.
Product SKU: D/AJ-1
Product Brand: Indian
Product Currency: ₹
Product Price: 550000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
5
| Type | OPEN, CLOSE |
|---|---|
| Capacity | 300 Kg, 350 Kg, 500 Kg, 750 Kg, 1000 Kg, 1250 Kg, 1500 Kg, 1750 Kg, 2000 Kg |
| Machine width | 1250mm, 1400mm, 1500mm, 1600mm, 1800mm, 2000mm, 2200mm, 2400mm, 2600mm, 2800mm, 3000mm, 3200mm, 3400mm |
| Fabric | Cotton, Cotton Polyester, Wool, Canvas |
Automatic Jigger | Best Fabric dyeing machine 300-2000 kgs. | Book Online
Automatic jigger is a new fabric dyeing machine or say hybrid version of a simple jigger and hydraulic jigger this jigger can dye all woven fabrics like cotton.
Product SKU: D/AJ-1
Product Brand: Indian
Product Currency: ₹
Product Price: 550000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
5
Youtube
Automatic Jigger | Best Fabric dyeing machine 300-2000 kgs. | Book Online
Automatic jigger is a new fabric dyeing machine or say hybrid version of a simple jigger and hydraulic jigger this jigger can dye all woven fabrics like cotton.
Product SKU: D/AJ-1
Product Brand: Indian
Product Currency: ₹
Product Price: 550000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
5
Based on 0 reviews
Be the first to review “Automatic Jigger”
-
Finishing Machinery
Stenter
The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.
Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.
It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.
Stenter comes with the following advance and improved features:
🔶 Higher Production Speeds
✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.🔶 Efficiency
✅ Double-jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.🔶 Maintenance
✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.
As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.
In Conclusion, this machine is best for Dyeing and Printing Plants.
SKU: S001 -
Burner, Heating Solution
Burner 200 – Stage 2
Burner 200 | Heating solution
The Gas Burner 200 is a heating solution for small-medium appliances. The gas burner can be used as either a primary or secondary heating source, offering great versatility to users. It is designed not only to be functional but also beautiful.
We designed this, will ensure you have a high-efficiency, energy-efficient heating solution.
The gas burner was created as a way of providing an aesthetically pleasing solution for companies looking for a simpler alternative.
Benefits
✅ Modern design
✅ Efficient
✅ Aesthetic
✅ Environmentally friendly
✅ Reduces air pollution because it reduces wood consumption by up to 5 times
✅ Tangential Ventilation
✅ Heats quickly and efficiently
SKU: n/a -
Batching, Makeup Machinery
Single Folding Machine
This Single Folding machine or fabric folding machine is one of the fabric makeup machinery which has the following features :
- Firstly, the Single Folding machine does fold the fabric from a loose form to an organized plated state before performing dyeing/printing/processing operations.
- In other words, the fabric needs an inspection before starting any processes.
- Secondly, the Single Folding machine also measures fabric length before any operation or after all processes.
- Thirdly, the Single Folding machine comes in four different sizes from 41″/36 (Small)* to 72″/67 (Large)
- Fourthly, woven fabrics like cotton, viscose, rayon, wool & polyester weigh from 70 to 700 gsm/meter square and fold on a Single Folding machine.
- Fifth and most importantly, the speed can be achieved up to 50 meters per minute while performing the process.
In conclusion, this fabric folding machine is best suitable for the garment industry or dyeing & printing plants.
🔸 Technical Specification
✅ For fabric up to 1700MM
✅ The working table descends up to 15” (380 mm).
✅ Length is of folds adjustable up to 1.00 meter.
✅ Cast Iron sidewalls are closed to make the machine robust and sturdy.
✅ Folding blades mounted on the carriage of steel roller chains.
✅ a simple device for quick and precise folding with knife adjustment
✅ Operating speed: 50 meters/minute.
✅ Drive on motor 2HP x 960RPM.
✅ Stroke-type length Counter with manual setting or ⭕ Digital counter.
SKU: n/a -
Burner, Heating Solution
Burner 550 – Stage 3
Burner 550 | Heating solution
This heating solution burner 550 comes to volume, potential, and cost efficiency. The Burner 550 is a series stage 3 covers output ranges under 80mg/kWh. These gas burners were designed with an advanced combusting head which provides consistent combustion even under difficult working conditions.
The placement of the components inside the burner permits easy and precise regulation and maintenance.
Benefits
🔥 Amazingly efficient at burning gas
🔥 Stable flame no matter what kind of weather you’re dealing with
🔥 High efficiency (80mg/kWh)
🔥 Efficient, clean combustion
🔥 Power is increased without complications✅ Easy to maintain
✅ Great energy savings
SKU: n/a -
Processing Machinery
Desizing Machine
Desizing machine
Desizing is the process of removing the size applied during weaving. The purpose of this fabric processing machinery Desizing machine is to remove the sizing ingredients such as starches, gums, PVA etc.
The starch has to be degraded into less water-soluble molecules by hydrolysis. The hydrolysis of starch using enzymes under particular concentration, temperature and duration is called desizing.
Desizing can do at room temperature to boiling temperature as per the quality of the enzyme.
Desizing Tank is made from Stainless Steel material. The tank can have open or fully enclosed construction as per requirement. The number of rollers in the tank facilitates suitable liquor takeup of every kind of fabric which is to be desized.
Desizing machine speed can be lowered or raised for proper take-up of the liquor for different grades of cloth.
🔸 Key Functions:
✅ 5 to 60Mtrs/Min operational speed.
⭕ Automatic or manual dozing system (Optional)
✅ Auto Steam Control.
✅ Easy usage.
⭕ Chemical preparation tanks (Optional)
✅ Desizing machines are available from 1600mm to 3400mm fabric width.
SKU: P/DM-1 -
Washing Machinery
Open Width Washing Range
Open width Washing Range
Open width Washing Range is for the fabric washing machine for woven fabrics. The Open width Washing Range machine has the following features.
- Firstly, The system consists of a specially shaped impeller in the drum in which water jets uniformly smashes the full fabric width very high washing performance on the upper and backside of the fabric.
- In other words, Open width Washing Range removes unfixed dyestuff, gum, and other chemicals from the fabric.
- Secondly, Washing with tanks can carry out pre-washing, rinsing, and chemical treatment.
- Therefore, Open width Washing Range improves fabric quality.
- An effective squeezer between the washing unit gives maximum liquor separation from one bath to another.
- Thirdly, Each washing compartment with its force-spray system, re-circulation pump, filtering device, overflow, drain, and heating arrangement.
- Fourthly, the Open width Washing Range’s working width is to be made from 1500mm to 3500mm depending on the client’s need.
- Fifthly, ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabric can be processed on this machine.
- Sixth and most Important is Perfect synchronizing of linear speed hence tension-less and creaseless transport of fabric all along the process.
🔶 ADVANTAGES :
✅ Excellent Washing efficiency.
✅ Extremely sturdy construction.
✅ Quiet running.
✅ Low energy consumption.
✅ Ease of operation.
✅ Optional knife spray between each strand of fabric with supply from a separate pump.
✅ Circulation and counter flow arrangement to save water.
✅ Low maintenance.
✅ Quick and simple installation.
✅ Tight closing glass windows on the sides to provide easy access.
✅ Direct steam heating by perforated S S Pipes.
✅ S S bottom rolls running in self-aligning bush bearing.
SKU: n/a
Related products
-
Dyeing Machinery
Semi Automatic Jigger Machine
Semi Automatic Dyeing Jigger
Roll Center 31″ (790 mm) – 36″ (915mm)
Capacity 350-500 Kg. (250 gsm)
Batch Dia 900-1100 mm
Available Width : 48″ To 150″ Roller WidthSemi Automatic Jumbo Jigger Machine
Roll Center 31″ (790 mm) – 36″ (915mm)
Capacity 350-500 Kg. (250 gsm)
Batch Dia 900-1100 mm
Available Width : 48″ To 150″ Roller WidthSKU: n/a -
Dyeing Machinery
Top Tube Soft Flow
Top Tube Soft flow dyeing machine very much suitable to process delicate woven & knitted fabrics. It’s soft nozzle decrease tension further avoid problems like crease marks, rope marks, shrinking etc.
Another benefit of this machine is its single vessel two chamber design reduce fabric loop length as well as processing time.
SKU: n/a -
Dyeing Machinery
HT.HP. Soft flow
HTHP Soft flow
- First and foremost, HTHP Soft Flow Dyeing Machine is suitable for sensitive surface structures and natural fabrics. All fabrics like cotton, wool, viscose, acrylic and blends of jersey, terry towel, velour and nylon.
- Secondly, HTHP Soft Flow Machine is a contemporary technology that uses a curved nozzle to transfer the cloth smoothly at a high fluid flow. As a result, reduce strain and avoid creases and peeling.
- Thirdly, by the new design, HTHP Soft Flow takes the Lowest liquor ratio up to 1:5 (on wet material) instead of the conventional design taking the liquor ratio up to 1:10 (on wet).
- Fourthly, HTHP Soft Flow is made of high-quality steel inside and out, making it rust-resistant.
- Fifthly, the nozzles inside HTHP Soft Flow come with 316L Quality stainless steel. It gives smooth operation to the cloth.
- Lastly, HTHP Soft Flow includes numerous safety features.
In conclusion, it is perfect for modern textile dyeing plants.
🔸 Technical Specification
✅ Lowest liquor ratio up to 1:5 (wet Fabric)
✅ Capacity: 50 to 2000 kg.
✅ Dye –30 To 500 Grms/Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ High Temp. – Up to 140° C.
✅ The vessel builds from stainless steel SS 316L Quality.➡ Online filter for easy clean-up even during the process with an extra filter mesh.
➡ For smooth fabric circulation, a Teflon Sheet is inside the chamber.
➡ Cup type very soft nozzle with low pressure & higher volume design.
➡ The fabric driving reel comes with a frequency controller.
SKU: D/HSF-1 -
Dyeing Machinery
HT.HP. Soft Over Flow
HTHP Soft Over Flow is just like the HTHP Soft Flow machine with a bigger capacity & for heavy fabrics.
HTHP Soft Over Flow is Specially Designed to process Heavy and sensitive fabrics like Terry Towel, and Curtain Bedsheet of 100% Cotton knit and woven fabrics. In short, it’s a Terry towel dyeing machine.
HTHP Soft Over Flow can work as a Soft Overflow with minor adjustments.
A larger nozzle diameter, with a Higher volume & low-pressure nozzle design and inside Teflon sheet are helpful to move the fabric very smoothly and gently without damaging the cloth.
A specially develop online filter design helps to collect the Terry towel fumes.
🔸 Technical Specification
✅ Capacity: 50 to 2000 kg.
✅ The process has a sensitive fabric like Terry Towels, Curtain, Bed Sheet, 100% cotton knit & woven etc.
✅ Work as Soft flow or as overflow dyeing.
✅ High Temp. – Up to 140 ° C.
✅ The vessel makes of stainless steel 316 L.
✅ Specially developed a filter to collect towel fumes.
✅ Teflon Sheet inside the chamber for smooth fabric movement.
✅ High volume, Low-pressure soft nozzle with a larger diameter for heavy and Larger width fabrics
✅ Fabric drive reel with frequency controller.
SKU: D/HSO-1
There are no reviews yet.