No products in the cart.
Dyeing Machinery
✅ Capacity: 300 Kg. to 2000 kg. [OPEN]
Automatic Jigger
Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER is a Hybrid of hydraulic & conventional JIGGER.
Automatic JIGGER comes with two types 1st one is OPEN TYPE & other one is CLOSE TYPE.
Where One-hand OPEN TYPE Automatic JIGGER comes with all the benefits like
✅ Auto tension control
✅ Auto speed control
✅ Auto cycle control
✅ Circulation system with filters to avoid centre to selvedge
✅ Suitable for any exhaust pre-treatment, dyeing & finish process
✅ Tension setting device to avoid running crease & machine jerks
⭕ Auto pendulum control (optional)
⭕ Batching or winch device (optional)
⭕ Auto water level controller (optional)
⭕ Pneumatic operated drain (optional)
Otherhand CLOSE TYPE Automatic JIGGER comes with the additional features like
✅ Auto circulation system
✅ Auto temperature controller
✅ A fully covered jigger will save utilities
⭕ Dosing side tank facility (optional)
⭕ Circulation system with filters to avoid centre to narrow border (optional)
The tension control system allows Automatic JIGGER to dye any fabric with ease. One operator can run four Automatic JIGGER machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric.
Automatic JIGGER uses both rollers powered by separate gearboxes and motors on inverter drives which do wonders for uniform dyes, even when running at varying speeds.
In conclusion, it is the best-woven dyeing machine, fabric dyeing machine or Cotton dyeing machine.
🔶 Technical Specification
✅ Capacity: 300 Kg. to 2000 kg. [OPEN]
✅ Capacity: 500 Kg. to 2000 kg. [CLOSE]
✅ Available Width: 1250mm to 3400mm
✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
✅ 0 to 10 Kgs. (Tension less operation Possible)
✅ Suitable for any Fabric from 30gsm to 500gsm
✅ S.S. Cladded Main Roll
✅ Pneumatic cylinders operated doors [CLOSE]
✅ Individual drive on each roller
✅Speed & tension control through a drive
₹550,000.00
AUTOMATIC JIGGER
Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER is a Hybrid of hydraulic & conventional JIGGER.
Automatic JIGGER comes with two types 1st one is OPEN TYPE as well 2nd one is CLOSE TYPE.
Where One-hand OPEN TYPE comes with all the benefits like
✅ Auto tension control
✅ Auto speed control
✅ Auto cycle control
✅ Circulation system with filters to avoid centre to selvedge
✅ Suitable for any exhaust pre-treatment, dyeing & finish process
✅ Tension setting device to avoid running crease & machine jerks
⭕ Auto pendulum control (optional)
⭕ Batching or winch device (optional)
⭕ Auto water level controller (optional)
⭕ Pneumatic operated drain (optional)
Otherhand CLOSE TYPE comes with the additional features like
✅ Auto circulation system
✅ Auto temperature controller
✅ A fully covered jigger will save utilities
⭕ Dosing side tank facility (optional)
⭕ Circulation system with filters to avoid centre to the edge (optional)
The tension control system allows dyeing nearly any fabric automatically with ease. One operator can run four machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric.
It uses both rollers sets powered by separate gearboxes and motors on inverter drives which can do wonders for giving uniform dyes, even when running at varying speeds.
🔶 Technical Specification
✅ Capacity: 300 Kg. to 2000Kg. [OPEN]
✅ Capacity: 500 Kg. to 2000Kg. [CLOSE]
✅ Available Width : 1250mm to 3400mm
✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
✅ 0 to 10 Kgs. (Tension less operation
Possible)
✅ Suitable for any Fabric from 30gsm to 500gsm
✅ S.S. Cladded Main Roll
✅ Pneumatic cylinders operated doors [CLOSE]
✅ Individual drive on each roller
✅Speed & tension control through a drive
🔶 Payment, Taxes and Delivery
Payment: Before dispatch of machinery, 40% advance and a balance against the proforma invoice.
Delivery: Delivery of machine ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales Tax: GST 18% (Domestic Orders) Or Vat 4% +1% No CST against form “H”( export orders).
Installation: Will be charged extra per machine over and above the price.
OPEN TYPE
CLOSE TYPE
1. Select Product
Choose the required specification & submit the details.
2. Get Offer
Get a Detailed Offer.
3. Pay The Advance
Pay the advance amount as per agreed terms.
4. Product Under Construction
Product goes under Construction according agreed time.
5. Pay The Rest Amount
Pay the balance amount as your machine get ready to dispatch.
6. Shipment Initiated
Shipment option available through Manufacturer.
7. Installation
Finally, the product will be installed at your plant.
Automatic Jigger | Best Fabric dyeing machine 300-2000 kgs. | Book Online
Automatic jigger is a new fabric dyeing machine or say hybrid version of a simple jigger and hydraulic jigger this jigger can dye all woven fabrics like cotton.
Product SKU: D/AJ-1
Product Brand: Indian
Product Currency: ₹
Product Price: 550000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
Editor's Rating:
5
5
| Type | OPEN, CLOSE |
|---|---|
| Capacity | 300 Kg, 350 Kg, 500 Kg, 750 Kg, 1000 Kg, 1250 Kg, 1500 Kg, 1750 Kg, 2000 Kg |
| Machine width | 1250mm, 1400mm, 1500mm, 1600mm, 1800mm, 2000mm, 2200mm, 2400mm, 2600mm, 2800mm, 3000mm, 3200mm, 3400mm |
| Fabric | Cotton, Cotton Polyester, Wool, Canvas |
Automatic Jigger | Best Fabric dyeing machine 300-2000 kgs. | Book Online
Automatic jigger is a new fabric dyeing machine or say hybrid version of a simple jigger and hydraulic jigger this jigger can dye all woven fabrics like cotton.
Product SKU: D/AJ-1
Product Brand: Indian
Product Currency: ₹
Product Price: 550000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
Editor's Rating:
5
5
Youtube
Automatic Jigger | Best Fabric dyeing machine 300-2000 kgs. | Book Online
Automatic jigger is a new fabric dyeing machine or say hybrid version of a simple jigger and hydraulic jigger this jigger can dye all woven fabrics like cotton.
Product SKU: D/AJ-1
Product Brand: Indian
Product Currency: ₹
Product Price: 550000
Price Valid Until: 2023-08-01
Product In-Stock: PreOrder
Editor's Rating:
5
5
Based on 0 reviews
Be the first to review “Automatic Jigger”
- Dyeing Machinery
Semi Automatic Jigger Machine
Semi Automatic Dyeing Jigger
Roll Center 31″ (790 mm) – 36″ (915mm)
Capacity 350-500 Kg. (250 gsm)
Batch Dia 900-1100 mm
Available Width : 48″ To 150″ Roller WidthSemi Automatic Jumbo Jigger Machine
Roll Center 31″ (790 mm) – 36″ (915mm)
Capacity 350-500 Kg. (250 gsm)
Batch Dia 900-1100 mm
Available Width : 48″ To 150″ Roller Width[spbsm-follow-buttons]
SKU: n/a - Accessories
Rubber Blanket
Rubber Blanket
in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:
- Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
- Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
- Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
- Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
- Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.
Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.
🔶 Technical Specification
- Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
- Fabric Width: offer current width of 1200mm to 3500mm.
- Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
- Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
- Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
- The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
- Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage.
In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.
SKU: n/a - Finishing Machinery
Compressive Shrinking Range
The Sole purpose of the Controlled Compressive Shrinking Range or ZEROZERO is to ensure that the garment made from such fabric does not shrink after the wash hence perfect dimensional stability.
As per standard, + / -1 % residual shrinkage is acceptable. Controlled Compressive Shrinking Range or ZEROZERO are available up to 3200mm working width fabric to assure total shrinkage protection to woven fabrics. It can be 100% cotton, cotton/polyester, cotton/viscose or tough and heaviest fabric like denim. Compressive Shrinking Range or ZEROZERO developed in a way that can shrinkage up to 12% in a single passage.
The most capable of shrinking medium, lightweight fabric to the heaviest denim, cotton blended suiting & shirting by watering cotton, terylene, hemp and its blends to shrink the cloth to meet the requirements of shrinkage, stabilization and improve the hand touch.
A controlled Compressive Shrinking Range is usually the last process in the sequence of fabric finishing. The woven fabric processed in the machine gets fully shrunk.
Before compressive shrinking, it is advisable to establish the width at which the cloth should get shrunk in length to meet the requirement of the garment makers. It is the best Fabric Finishing machinery.
🔸 Technical Specification
✅ A.C. frequency conversion transmission, designed speed: 10-80m/minute.
✅ Shrinkage 0 – 12 % depending upon fabric quality.
✅ Minimum and controlled tension.
⭕ Imported Rubber Blanket and Polyester Felt will be provided optionally.
✅ A Jacketed drum in 1500mm, 2000mm and 2500mm diameters.
✅ Stainless Steel damping & conditioning unit supplied as standard Parts.SKU: n/a - Processing Machinery
Polymeriser
Polymeriser
Polymeriser is to use for fixing printed garments. Polymeriser is an Important part of Processing machinery cause it secures the colour before the washing and finishing. There are the following features in it.
- Firstly, Polymeriser assures perfect fixation of dyes even at higher temperatures. In other words, the Dyes can be permanent before starting the washing and finishing process of the cloth.
- Secondly, It is most suitable for curing Phthalein dye, Pigments, and resin set.
- Thirdly, Pre-dryer removes gaseous fumes from printed fabrics – an exclusive speciality of this Machine. The Machine operates efficiently in the temperature range from 30ºC Temperature to 180ºC and ensures automatic regulation of temperatures within the chamber.
- Fourthly, the width can be made from 1600mm to 3200mm as per the client’s need.
- Fifthly, Garment weighted from 70 to 700 gsm/per meter square can be processed.
- The sixth and most Importantly speed can be achieved up to 40 meters per minute while performing the process.
In conclusion, Polymeriser is best suitable for the garment industry or dyeing & printing plants.
🔸 ADVANTAGES :
➡ Supply with hot air jets, recirculating fans and steam or thermic oil heating for best curing result.
➡ Separate blowers for top and bottom air nozzles.
➡ Its uniformity in temperature, width-wise, length and diagonally.
➡ No dropping by condensation.
➡ Variable speed up to 40 meters per minute by A.C. Inverter System.
➡ It is available in 60 to 150 meters of cloth content curing zone.SKU: P001 - Dyeing Machinery
Hydraulic Jigger
Hydraulic Jigger
Hydraulic Jigger is a piece of revolutionary equipment for open-width Scouring, Bleaching & Dyeing processes in batch form. One of the best Dyeing machinery with perfect dyeing results. Hydraulic Jigger has the following features:
- Firstly, Hydraulic Jigger’s Adjustable tension according to Fabric quality ensures perfect pre-treatment and dyeing irrespective of run lengths for the same shade/colour. In other words, Hydraulic Jigger dyes the Clothing rapidly with accuracy.
- Secondly, Hydraulic Jigger comes with closed chambers with doors that close while the operation is performing. Which gives it desired temperature in less time. Therefore, less wastage of resources.
- Thirdly, Consistent dyeing of the same shade for any number of times in the future, Moreover the highly efficient washing system saves washing time and precious Water. The uniform tension, process time, and ideal temperature contribute to the dying quality.
- Fourthly, Hydraulic Jigger controls these parameters resulting in fully controllable and reproducible shades. The controlled temperature and a steady circulation of dye liquid for flawless dyeing. PLC aided operation for repeatability. Suiting, shirting, and delicate fabrics such as rayon are best suited.
- Fifthly, the Hydraulic Jigger is available in 500kg and 1000kg capacity from 1200mm to 3000mm working width depending on the client’s need. Fabric ranging from 70 to 700 gsm/meter square of woven material may be dyed in a Hydraulic Jigger, making it ideal for Suiting, Shirting, and Delicate textile such as rayon.
Above all, flawless synchronisation of linear speed results in tension-free and crease-free fabric conveyance throughout the process.
🔸 Technical Specification
➡ Automatic reversal at the end of each cycle setting
➡ Spray washing through a selector switch
➡ Stopping the machine at the pre-determined sampling point
➡ Water filling through rotary switch
➡ Drain through a selector switch
➡ Digital Speed indication
➡ Speed setting through P L C
➡ Replenishing from dosing tank through valve
➡ Indirect steam heating through Heat Exchanger
➡ Temperature Controller.
➡ A valve adjusts the tension on the cloth.
➡ Soft Start & Stop
➡ Pendulation when adding and emptying liquid
➡ Touch Screen
➡ Specially designed software for the machineSKU: n/a - Processing Machinery
Desizing Machine
Desizing machine
Desizing is the process of removing the size applied during weaving. The purpose of this fabric processing machinery Desizing machine is to remove the sizing ingredients such as starches, gums, PVA etc.
The starch has to be degraded into less water-soluble molecules by hydrolysis. The hydrolysis of starch using enzymes under particular concentration, temperature and duration is called desizing.
Desizing can do at room temperature to boiling temperature as per the quality of the enzyme.
Desizing Tank is made from Stainless Steel material. The tank can have open or fully enclosed construction as per requirement. The number of rollers in the tank facilitates suitable liquor takeup of every kind of fabric which is to be desized.
Desizing machine speed can be lowered or raised for proper take-up of the liquor for different grades of cloth.
🔸 Key Functions:
✅ 5 to 60Mtrs/Min operational speed.
⭕ Automatic or manual dozing system (Optional)
✅ Auto Steam Control.
✅ Easy usage.
⭕ Chemical preparation tanks (Optional)
✅ Desizing machines are available from 1600mm to 3400mm fabric width.
SKU: P/DM-1
Related products
- Dyeing Machinery
HT.HP. Soft Over Flow
HTHP Soft Over Flow is just like the HTHP Soft Flow machine with a bigger capacity & for heavy fabrics.
HTHP Soft Over Flow is Specially Designed to process Heavy and sensitive fabrics like Terry Towel, and Curtain Bedsheet of 100% Cotton knit and woven fabrics. In short, it’s a Terry towel dyeing machine.
HTHP Soft Over Flow can work as a Soft Overflow with minor adjustments.
A larger nozzle diameter, with a Higher volume & low-pressure nozzle design and inside Teflon sheet are helpful to move the fabric very smoothly and gently without damaging the cloth.
A specially develop online filter design helps to collect the Terry towel fumes.
🔸 Technical Specification
✅ Capacity: 50 to 2000 kg.
✅ The process has a sensitive fabric like Terry Towels, Curtain, Bed Sheet, 100% cotton knit & woven etc.
✅ Work as Soft flow or as overflow dyeing.
✅ High Temp. – Up to 140 ° C.
✅ The vessel makes of stainless steel 316 L.
✅ Specially developed a filter to collect towel fumes.
✅ Teflon Sheet inside the chamber for smooth fabric movement.
✅ High volume, Low-pressure soft nozzle with a larger diameter for heavy and Larger width fabrics
✅ Fabric drive reel with frequency controller.SKU: D/HSO-1 - Dyeing Machinery
Semi Automatic Jigger Machine
Semi Automatic Dyeing Jigger
Roll Center 31″ (790 mm) – 36″ (915mm)
Capacity 350-500 Kg. (250 gsm)
Batch Dia 900-1100 mm
Available Width : 48″ To 150″ Roller WidthSemi Automatic Jumbo Jigger Machine
Roll Center 31″ (790 mm) – 36″ (915mm)
Capacity 350-500 Kg. (250 gsm)
Batch Dia 900-1100 mm
Available Width : 48″ To 150″ Roller Width[spbsm-follow-buttons]
SKU: n/a - Dyeing Machinery
Atmospheric Soft Over Flow
Atmospheric Soft flow
The Atmospheric Soft Flow machine is the same as HTHP Soft flow Dyeing machine. The only difference is Atmospheric Soft Flow works at low temperatures & without pressure.
Some fabrics like Cotton & Cotton blends don’t require high temperatures. In that case, Soft Flow is very much suitable because Atmospheric Soft Flow reduces the running cost by saving energy. In short, it is a Cotton dyeing machine.
Furthermore, the liquor ratio of the Soft Flow machine is lower than that of the HTHP Soft Flow machine.
🔸 Technical Specification
✅ Lowest liquor ratio up to 1:4 (wet Fabric)
✅ Capacity: 50 to 1200 kg.
✅ Dye –30 To 500 Grms/Mtr. Sq. Fabrics (Woven & Knitted Fabrics)
✅ Maximum Temprature – Up to 98° C.
✅ The vessel builds from stainless steel SS 316L Quality.➡ Online filter for easy clean-up even during the process with an extra filter mesh.
➡ For smooth fabric circulation, a Teflon Sheet is inside the chamber.
➡ Cup type very soft nozzle with low pressure & higher volume design.
➡ The fabric driving reel comes with a frequency controller.
SKU: D/ASF-1 - Dyeing Machinery
Hydraulic Jigger
Hydraulic Jigger
Hydraulic Jigger is a piece of revolutionary equipment for open-width Scouring, Bleaching & Dyeing processes in batch form. One of the best Dyeing machinery with perfect dyeing results. Hydraulic Jigger has the following features:
- Firstly, Hydraulic Jigger’s Adjustable tension according to Fabric quality ensures perfect pre-treatment and dyeing irrespective of run lengths for the same shade/colour. In other words, Hydraulic Jigger dyes the Clothing rapidly with accuracy.
- Secondly, Hydraulic Jigger comes with closed chambers with doors that close while the operation is performing. Which gives it desired temperature in less time. Therefore, less wastage of resources.
- Thirdly, Consistent dyeing of the same shade for any number of times in the future, Moreover the highly efficient washing system saves washing time and precious Water. The uniform tension, process time, and ideal temperature contribute to the dying quality.
- Fourthly, Hydraulic Jigger controls these parameters resulting in fully controllable and reproducible shades. The controlled temperature and a steady circulation of dye liquid for flawless dyeing. PLC aided operation for repeatability. Suiting, shirting, and delicate fabrics such as rayon are best suited.
- Fifthly, the Hydraulic Jigger is available in 500kg and 1000kg capacity from 1200mm to 3000mm working width depending on the client’s need. Fabric ranging from 70 to 700 gsm/meter square of woven material may be dyed in a Hydraulic Jigger, making it ideal for Suiting, Shirting, and Delicate textile such as rayon.
Above all, flawless synchronisation of linear speed results in tension-free and crease-free fabric conveyance throughout the process.
🔸 Technical Specification
➡ Automatic reversal at the end of each cycle setting
➡ Spray washing through a selector switch
➡ Stopping the machine at the pre-determined sampling point
➡ Water filling through rotary switch
➡ Drain through a selector switch
➡ Digital Speed indication
➡ Speed setting through P L C
➡ Replenishing from dosing tank through valve
➡ Indirect steam heating through Heat Exchanger
➡ Temperature Controller.
➡ A valve adjusts the tension on the cloth.
➡ Soft Start & Stop
➡ Pendulation when adding and emptying liquid
➡ Touch Screen
➡ Specially designed software for the machineSKU: n/a
There are no reviews yet.