Dark Light

Jigger


Fabric dyeing machines can come in all shapes and sizes, but

Jigger is typically an open-framed machine with a rotating drum that holds the fabric to be dyed. Jigger is the standard and oldest way to dye cotton and cotton blend fabric.

The jigger machine has been used for a long time to treat small to medium size lots of woven fabric with an open-width exhaust dyeing process. Dye jiggers are available in Two variants 1st Jigger is an Open type with the following options:

✅ Fully S.S. construction or Mounted on C.I. Walls.
✅ With a water re-circulation system and temperature controllers.
✅ A.C. Motor drive or Inverter Control Drive
✅ Semi Automatic or Fully Automatic
S.S. Cladded Batch Rollers of Ebonite coated Batch Rollers

2nd one is a Close type with the following advancement:


✅ Gear Box Type Semi Automatic Maxi Jigger Machine
S.S. Spring Type Floating Device
✅ Roof Heating is Provided to Prevent Dropping on Fabrics
✅ Direct & Indirect Heating with Temperature Controller
✅ Auto R/F System with Cycle Contrail with the help of PLC
⭕ Pneumatic Operated Auto Drain (Optional)
⭕ A Direct Mounted Reduction Gear Box (Optional)

🔸 Technical Specification

The Machines are available from 1250mm to 3400mm in width
✅ Roll Center: 25″, 31″, 36″, 41″
Complete Stainless Steel Body with M.S. Base Frame
✅ Capacity: 225 Kg., 350 Kg., 500 Kg., 750Kg., 1000Kg., 1500Kg.(250 Gsm)
Complete Stainless Steel Body.
Heavy-duty brake drum.
Heavy duty differential Gear unit.
A.C. Frequency Drive.
✅ Stainless Steel Cladded Main Roll
✅ Circulation System with 2.0 H.P.

In conclusion, This is best for small batches to mass dyeing lots with the durable built of Stainless Steel it gives durability instead of the lower model. The water re-circulation system makes accurate dyeing results while keeping the fabric clean. Heavy-duty brake drums give precise tension to the cloth with the help of an A.C. Frequency drive.

In short, It is the basic necessity for a small dyeing house to a large dyeing industry with less space and higher capacity. It is the Best Fabric Dyeing machine for small to medium size cotton dyeing units.

525,000.00

Compare

Jigger

Fabric dyeing machines can come in all shapes and sizes, but

Jigger is typically an open-framed machine with a rotating drum that holds the fabric to be dyed. Jigger is a standard and oldest way to dye cotton and cotton blend fabric.

Jigger machine has been used for a long time to treat small to medium size lots of woven fabric with an open-width exhaust dyeing process. Dye jiggers are available in Two variants 1st Jigger is an Open type with the following options:

✅ Fully S.S. construction or Mounted on C.I. Walls.
✅ With a water re-circulation system and temperature controllers.
✅ A.C. Motor drive or Inverter Control Drive
✅ Semi Automatic or Fully Automatic
✅ S.S. Cladded Batch Rollers of Ebonite coated Batch Rollers

2nd Jigger is a Close type with the following advancement:

✅ Gear Box Type Semi Automatic Maxi Jigger Machine
✅ S.S. Spring Type Floating Device
✅ Roof Heating Provided to Prevent Dropping on Fabrics
✅ Direct & Indirect Heating with Temperature Controller
✅ Auto R/F System with Cycle Contrail with the help of PLC
⭕ Pneumatic Operated Auto Drain (Optional)
⭕ The Direct Mounted Reduction Gear Box (Optional)

🔶 Technical Specification

The Machines are available from 1250mm to 3400mm in width
✅ Roll Center: 25″, 31″, 36″, 41″
Complete Stainless Steel Body with M.S. Base Frame
✅ Capacity: 225 Kg., 350 Kg., 500 Kg., 750Kg., 1000Kg., 1500Kg.(250 Gsm)
Complete Stainless Steel Body.
Heavy duty brake drum.
Heavy duty differential Gear unit.
A.C. Frequency Drive.
✅ Stainless Steel Cladded Main Roll
✅ Circulation System with 2.0 H.P.

🔶 Payment, Taxes and Delivery

Payment: Before dispatch of machinery, 40% advance and a balance against the proforma invoice.
Delivery: Delivery of machine ideally comes within 4 to 6 weeks.
Freight: Will be paid by the customer.
Sales TaxGST 18% (Domestic Orders) Or Vat 4% +1% No CST against form “H”( export orders).
Installation: Will be charged extra per machine over and above the price.


 

  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.

 

Jigger | Fabric dyeing machine | 225 to 1500 Kgs. | Best buy
Jigger 1

Jigger has been used for a long time to treat medium size lots of woven with open width exhaust dyeing process.Dye jiggers are available in many variants

Product SKU: D/J-1

Product Brand: Indian

Product Currency:

Product Price: 5,25,000

Price Valid Until: 2023-08-01

Product In-Stock: PreOrder

Editor's Rating:
4.5
SKU: jigger Category: Tag:
Fabric

Cotton, Cotton Polyester, Wool, Canvas, Silk

Machine Width

1250mm, 1400mm, 1500mm, 1600mm, 1800mm, 2000mm, 2200mm, 2400mm, 2600mm, 2800mm, 3000mm, 3200mm, 3400mm

Type

OPEN, CLOSE

Capacity

250KG, 350 KG, 500 KG, 750 KG, 1000 KG, 1500 KG

 

 

 

 

 

 

 

 

 

 

 

 

Jigger | Fabric dyeing machine | 225 to 1500 Kgs. | Best buy
Jigger 1

Jigger has been used for a long time to treat medium size lots of woven with open width exhaust dyeing process.Dye jiggers are available in many variants

Product SKU: D/J-1

Product Brand: Indian

Product Currency:

Product Price: 5,25,000

Price Valid Until: 2023-08-01

Product In-Stock: PreOrder

Editor's Rating:
4.5

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Jigger”

There are no reviews yet.

  • Stenter

    0 out of 5
    (0)

    The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.

    Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.

    It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.

    Stenter comes with the following advance and improved features:

    🔶  Higher Production Speeds

    ✅ Use of elongated oval Nozzle slits for higher air velocity.
    ✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
    ✅ High-energy blower fans displace high volumes of air.
    ✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
    ✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

    🔶 Efficiency

    ✅ Double-jacketed sealed provides the best insulation.
    ✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
    ✅ All pipelines are installed inside the machine to cut out conduction losses.
    ✅ Give 15% More Saving against other stenter.

    🔶 Maintenance

    ✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
    ✅ Online sliding filters for lint removal.
    ✅ Easy access inside chambers for observation.
    ✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

    Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.

    As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

    In Conclusion, this machine is best for Dyeing and Printing Plants.


     

    SKU: S001
  • Automatic Jigger

    0 out of 5
    (0)

    Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER  is a Hybrid of hydraulic & conventional JIGGER.

    Automatic JIGGER comes with two types 1st one is OPEN TYPE & other one is CLOSE TYPE.

    Where One-hand OPEN TYPE Automatic JIGGER comes with all the benefits like 

    ✅ Auto tension control
    ✅ Auto speed control
    ✅ Auto cycle control
    ✅ Circulation system with filters to avoid centre to selvedge
    ✅ Suitable for any exhaust pre-treatment, dyeing & finish process
    ✅ Tension setting device to avoid running crease & machine jerks

    ⭕ Auto pendulum control
    (optional)
    ⭕ Batching or winch device (optional)
    ⭕ Auto water level controller (optional)
    ⭕ Pneumatic operated drain (optional)

    Otherhand CLOSE TYPE Automatic JIGGER comes with the additional features like

    ✅ Auto circulation system
    ✅ Auto temperature controller
    ✅ A fully covered jigger will save utilities

    ⭕ Dosing side tank facility
    (optional)
    ⭕ Circulation system with filters to avoid centre to narrow border (optional)

    The tension control system allows Automatic JIGGER to dye any fabric with ease. One operator can run four Automatic JIGGER machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric. 

    Automatic JIGGER uses both rollers powered by separate gearboxes and motors on inverter drives which do wonders for uniform dyes, even when running at varying speeds.

    In conclusion, it is the best-woven dyeing machine, fabric dyeing machine or Cotton dyeing machine.

    🔶 Technical Specification

    ✅ Capacity: 300 Kg. to 2000 kg. [OPEN]
    ✅ Capacity: 500 Kg. to 2000 kg. [CLOSE]
    ✅ Available Width: 1250mm to 3400mm
    ✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
    ✅ 0 to 10 Kgs. (Tension less operation Possible)
    ✅ Suitable for any Fabric from 30gsm to 500gsm
    ✅ S.S. Cladded Main Roll
    ✅ Pneumatic cylinders operated doors [CLOSE]
    ✅ Individual drive on each roller
    ✅Speed & tension control through a drive


     

    SKU: n/a
  • Roll Wrapping

    0 out of 5
    (0)

    Roll Wrapping 

    Fabric Roll wrapping machine is one of the most required Accessories for pre-delivery processes in Textile plants and Mills. The primary object of the fabric roll wrapping machine is to wrap ready-to-ship rolls so that the fabric remains safe while being delivered to the customer. 

    Fabric Roll wrapping machines can wrap material rolls of Denim Cloth, Curtain Cloth, Carpets, Foam sheets, Upholsteries, Fabrics, Film, Paper etc. which have a Maximum roller height from ground level up to 400 millimetres.

    The fabric Roll wrapping machine is simple to operate, and the sturdy & safe control panel makes it easy to load and unload the fabric roll with the ease of integration into conveyor lines.

    With a speed of up to 50 meters per minute, making 20 to 40 rolls per hour while performing variable overlap, amount of stretch, and roller speed, the fabric roll wrapping machine saves labour, time and money.

    Because of its unique construction, traverse can accommodate a variety of roll widths. Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).

    Inshot fabric Roll wrapping/Stretch wrap machines make it possible to wrap, store and protect ready-to-ship rolls while protecting rolls from dirt and damage.

    Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.

    🔸 Technical Specification

    ✅ Maximum roller height from ground level up to 400mm can be processed.

    ✅ Speed up to 50 meters/minute.

    ✅ Maximum stretch Power Roller Pre-Stretch Carriage with Pre-Stretch Ratio adjustable up to 300% (Depending upon Film Gauge & Quality).

    ✅ Rolls/Hour: 20-40 rolls.

    ✅ Weight/Roll: 400kgs

    ✅ Roll Diameter: 600mm

    ✅ Roll Width: 2100mm (As Par Fabric width)


     

    SKU: A/WR-1-1
  • ,

    Burner 200 – Stage 2

    0 out of 5
    (0)

    Burner 200 | Heating solution

    The Gas Burner 200 is a heating solution for small-medium appliances. The gas burner can be used as either a primary or secondary heating source, offering great versatility to users. It is designed not only to be functional but also beautiful.

    We designed this, will ensure you have a high-efficiency, energy-efficient heating solution.

    The gas burner was created as a way of providing an aesthetically pleasing solution for companies looking for a simpler alternative.

    Benefits
    ✅ Modern design
    ✅ Efficient
    ✅ Aesthetic
    ✅ Environmentally friendly
    ✅ Reduces air pollution because it reduces wood consumption by up to 5 times
    ✅ Tangential Ventilation
    ✅ Heats quickly and efficiently

     

    SKU: n/a
  • ,

    Single Folding Machine

    0 out of 5
    (0)

    This Single Folding machine or fabric folding machine is one of the fabric makeup machinery which has the following features :

    • Firstly, the Single Folding machine does fold the fabric from a loose form to an organized plated state before performing dyeing/printing/processing operations.
    • In other words, the fabric needs an inspection before starting any processes.
    • Secondly, the Single Folding machine also measures fabric length before any operation or after all processes.
    • Thirdly, the Single Folding machine comes in four different sizes from 41″/36 (Small)* to 72″/67 (Large)
    • Fourthly, woven fabrics like cotton, viscose, rayon, wool & polyester weigh from 70 to 700 gsm/meter square and fold on a Single Folding machine.
    • Fifth and most importantly, the speed can be achieved up to 50 meters per minute while performing the process.
    In conclusion, this fabric folding machine is best suitable for the garment industry or dyeing & printing plants. 

    🔸 Technical Specification

    ✅ For fabric up to 1700MM
    ✅ The working table descends up to 15” (380 mm).
    ✅ Length is of folds adjustable up to 1.00 meter.
    ✅ Cast Iron sidewalls are closed to make the machine robust and sturdy.
    ✅ Folding blades mounted on the carriage of steel roller chains.
    ✅ a simple device for quick and precise folding with knife adjustment 
    ✅ Operating speed: 50 meters/minute.
    ✅ Drive on motor 2HP x 960RPM.
    ✅ Stroke-type length Counter with manual setting or ⭕ Digital counter.

     

    SKU: n/a
  • Cylinder Drying Range

    0 out of 5
    (0)

    Drying Range

    The Drying Range or VDR (Vertical Drying Range Machine) is one of the most demanding processing machinery in Woven dyeing & printing plants. The Drying Range has the following features that make it an essential part of the plant.

    • Firstly, It ensures rapid drying of fabric at high steam pressure.
    • In other words, It is suitable for fabric drying, semi-drying, and fabric that doesn’t require heat setting or Clothes which need semi-dry or completely dry.
    • Secondly, a Belt drive or individual drive for tensionless and crease-free passage of fabric on the cylinder result in the cloth moving smoothly.
    • Thirdly, an Individual trapping system for faster condensate removal inside chambers.
    • Therefore, it keeps cylinders at maximum heat.
    • Fourthly, the working width options from 1250mm to 3500mm according to the client’s need.
    • Fifthly, ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be rolled on this machine.
    • Sixthly and most Important Drying Range has the option of 6, 8, 10, 12, 16, 20, or 24 cylinders in a single or double frame.

    Above all, more numbers of cylinders equal more speed.

    In conclusion, this machine is best suitable for Dyeing and Printing Plants.

    🔸 Advantages:

    ➡ Long Lasting & sturdy construction
    ➡ Lowest consumption data
    ➡ Quick heating up
    ➡ Easy to operate
    ➡ Drying with minimum tension
    ➡ Crease-free fabric passage
    ➡ Perfect temperature uniformity across fabric width
    ➡ Highest product quality
    ➡ Shut off valves for cylinders
    ➡ Lowest maintenance effort
    ➡ Lowest radial run out and perfect welding craftsmanship

    🔸 Technical Specification:

    ✅ Box type or beam stack structures as per choice.
    Belt-driven or individual drive for tension-less and crease-free passage for fabric on cylinders.
    ✅ Options of 2 bowls or three bowls mangle to attached with cylinder dryer as per customer need.
    ✅ Any width from 1250mm to 3500mm of the dryer is supplied.
    The Drying Range has the option of 6, 8, 10, 12, 16, 20, or 24 cylinders in a single or double frame.
    ✅ Every/alternate cylinder can have an individual geared motor drive if required.
    ✅ An Individual trapping system for faster condensate removal from cylinders.

    Drying Range Types


     

     

     

     

     

     

    SKU: n/a
Share on Social Media
Open chat