Dark Light

Stenter


The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.

Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.

It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.

Stenter comes with the following advance and improved features:

🔶  Higher Production Speeds

✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency

✅ Double-jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance

✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.

As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.


3,000,000.00

Stenter

The Stenter is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities to give the fabric the final result of all the processes it went through. Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out. Stenter also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.
Stenter comes with the following advance and improved features:

🔶  Higher Production Speeds
✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency
✅ Double jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance
✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advance chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.
As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.


  • null

    1. Select Product

    Choose the required specification & submit the details.

  • null

    2. Get Offer

    Get a Detailed Offer.

  • null

    3. Pay The Advance

    Pay the advance amount as per agreed terms.

  • null

    4. Product Under Construction

    Product goes under Construction according agreed time.

  • null

    5. Pay The Rest Amount

    Pay the balance amount as your machine get ready to dispatch.

  • null

    6. Shipment Initiated

    Shipment option available through Manufacturer.

  • null

    7. Installation

    Finally, the product will be installed at your plant.

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5
SKU: S001 Category: Tags: ,
Fabric

Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar

Fabric Width

1600mm, 1800mm, 2400mm, 2600mm, 2800mm, 3000mm, 3200mm, 3400mm

Chambers

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5

Youtube

Coming Soon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stenter | Fabric Finishing Machine | Book 1 to 12 Chambers | Accurate
Stenter 1

purpose of the stenter or hot air machine is to heat setting the fabric and to stretch it's width wise to recover the uniform width. It comes with customize sizes.

Product SKU: F/S-1

Product Brand: Indian

Product Currency: INR

Product Price: 3000000

Price Valid Until: 2027-08-01

Product In-Stock: PreOrder

Editor's Rating:
5

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Stenter”

There are no reviews yet.

  • Rubber Blanket

    (1)

    Rubber Blanket

    in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:

    • Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.
    • Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.
    • Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.
    • Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.
    • Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.

    Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.

    🔶 Technical Specification

    • Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.
    • Fabric Width: offer current width of 1200mm to 3500mm.
    • Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.
    • Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)
    • Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.
    • The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.
    • Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage. 

    Compressive Shrinking RangeComfit Machine

    In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.

     


     

     

     

     

    SKU: n/a
  • Polymeriser

    0 out of 5
    (0)

    Polymeriser

    Polymeriser is to use for fixing printed garments. Polymeriser is an Important part of Processing machinery cause it secures the colour before the washing and finishing. There are the following features in it.

    • Firstly, Polymeriser assures perfect fixation of dyes even at higher temperatures. In other words, the Dyes can be permanent before starting the washing and finishing process of the cloth.
    • Secondly, It is most suitable for curing Phthalein dye, Pigments, and resin set.
    • Thirdly, Pre-dryer removes gaseous fumes from printed fabrics – an exclusive speciality of this Machine. The Machine operates efficiently in the temperature range from 30ºC Temperature to 180ºC and ensures automatic regulation of temperatures within the chamber.
    • Fourthly, the width can be made from 1600mm to 3200mm as per the client’s need.
    • Fifthly, Garment weighted from 70 to 700 gsm/per meter square can be processed.
    • The sixth and most Importantly speed can be achieved up to 40 meters per minute while performing the process.

    In conclusion, Polymeriser is best suitable for the garment industry or dyeing & printing plants.

    🔸 ADVANTAGES :

    ➡ Supply with hot air jets, recirculating fans and steam or thermic oil heating for best curing result.
    ➡ Separate blowers for top and bottom air nozzles.
    ➡ Its uniformity in temperature, width-wise, length and diagonally.
    ➡ No dropping by condensation.
    ➡ Variable speed up to 40 meters per minute by A.C. Inverter System.
    ➡ It is available in 60 to 150 meters of cloth content curing zone.


     

    SKU: P001
  • Automatic Jigger

    0 out of 5
    (0)

    Automatic JIGGER is one of the best dyeing machine inventions for simplifying the dying process. Automatic JIGGER  is a Hybrid of hydraulic & conventional JIGGER.

    Automatic JIGGER comes with two types 1st one is OPEN TYPE & other one is CLOSE TYPE.

    Where One-hand OPEN TYPE Automatic JIGGER comes with all the benefits like 

    ✅ Auto tension control
    ✅ Auto speed control
    ✅ Auto cycle control
    ✅ Circulation system with filters to avoid centre to selvedge
    ✅ Suitable for any exhaust pre-treatment, dyeing & finish process
    ✅ Tension setting device to avoid running crease & machine jerks

    ⭕ Auto pendulum control
    (optional)
    ⭕ Batching or winch device (optional)
    ⭕ Auto water level controller (optional)
    ⭕ Pneumatic operated drain (optional)

    Otherhand CLOSE TYPE Automatic JIGGER comes with the additional features like

    ✅ Auto circulation system
    ✅ Auto temperature controller
    ✅ A fully covered jigger will save utilities

    ⭕ Dosing side tank facility
    (optional)
    ⭕ Circulation system with filters to avoid centre to narrow border (optional)

    The tension control system allows Automatic JIGGER to dye any fabric with ease. One operator can run four Automatic JIGGER machines simultaneously thanks to its PLC system, and the individual drive “automatic dyeing jigger” runs on zero tension on the fabric. 

    Automatic JIGGER uses both rollers powered by separate gearboxes and motors on inverter drives which do wonders for uniform dyes, even when running at varying speeds.

    In conclusion, it is the best-woven dyeing machine, fabric dyeing machine or Cotton dyeing machine.

    🔶 Technical Specification

    ✅ Capacity: 300 Kg. to 2000 kg. [OPEN]
    ✅ Capacity: 500 Kg. to 2000 kg. [CLOSE]
    ✅ Available Width: 1250mm to 3400mm
    ✅ S.S. Structure 304 Out Outer body 316 mail rolls plus inner bottom
    ✅ 0 to 10 Kgs. (Tension less operation Possible)
    ✅ Suitable for any Fabric from 30gsm to 500gsm
    ✅ S.S. Cladded Main Roll
    ✅ Pneumatic cylinders operated doors [CLOSE]
    ✅ Individual drive on each roller
    ✅Speed & tension control through a drive


     

    SKU: n/a
  • Denim Finishing Range

    0 out of 5
    (0)

    Denim Finishing Range

    The Denim Finishing Range Exclusive purpose is to ensure that the garment made from such fabric does not shrink after the wash hence perfect dimensional stability.

    As per standard, + / -1 % residual shrinkage is acceptable. Denim Finishing Range is available for up to  3600mm working width fabric to assure total shrinkage protection to Denim fabrics. 

    Denim Finishing Range was developed in a way that can shrinkage up to 14% in a single passage.

    Denim Finishing Range is usually the last process in the sequence of fabric finishing. The Denim fabric processed in Denim Finishing Range gets fully shrunk.

    Before Denim Finishing Range, it is advisable to establish the width at which the cloth should get shrunk in length to meet the requirement of the garment makers. It is the best Fabric Finishing machinery.

    🔸 Key Features:

    ✅ Ensuring Required Shrinkage of 14 Ounce Denim in Single RUN At a Speed of 40 to 50 Mtrs / Min.
    ✅ Matching all parameters of Shrinkage, Feel, Warp & Weft Tension.
    ✅ Complete Machine with P.L.C. Controlled Inverter Drive.
    ✅ Large Touch Screen, Showing Shrinkage, Speed and Other Data, Minimum Usage, of Steam & Power.
    ✅ User-friendly machine with the shortest Payback time.
    ✅ Can finish lycra fabrics in a single run with required weft and warp shrinkage at the speed of 40 mt / min.
    ✅ Specially designed heavy warp pull to control the width of the fabric and warp stretch control by P L C.
    ✅ Motorized antiskew device to control the skew setting of fabric twill by forwarding and reversing the movement of motors.
    ✅ Specially developed a shrinking unit to achieve shrinkage up to 14 % depending upon the quality of the fabric with residual shrinkage of 1 %.
    ✅ 2500mm dia Mirror polished Jacketed main palmer cylinder with rotary joints.
    ✅ The number of 2 cooling cylinders is provided at the exit of the palmer unit to cool down the fabrics.
    ⭕ Singing unit at the feeding side. (Optional)
    ⭕ Brushing unit at feeding side. (Optional)
    ⭕ Temperature controlling of shrinkage and palmer unit by PLC. (Optional)
    ⭕ Big Batching device with ‘J’ scray at plating side. (Optional)

     

    SKU: F/DFR-1
  • HT.HP. Soft Over Flow

    0 out of 5
    (0)

    HTHP Soft Over Flow is just like the HTHP Soft Flow machine with a bigger capacity & for heavy fabrics.

    HTHP Soft Over Flow is Specially Designed to process Heavy and sensitive fabrics like Terry Towel, and Curtain Bedsheet of 100% Cotton knit and woven fabrics. In short, it’s a Terry towel dyeing machine.

    HTHP Soft Over Flow can work as a Soft Overflow with minor adjustments.

    A larger nozzle diameter, with a Higher volume & low-pressure nozzle design and inside Teflon sheet are helpful to move the fabric very smoothly and gently without damaging the cloth.

    A specially develop online filter design helps to collect the Terry towel fumes.

    🔸 Technical Specification

    ✅ Capacity: 50 to 2000 kg.
    ✅ The process has a sensitive fabric like Terry Towels, Curtain, Bed Sheet, 100% cotton knit & woven etc.
    ✅ Work as Soft flow or as overflow dyeing.
    ✅ High Temp. – Up to 140 ° C.
    ✅ The vessel makes of stainless steel 316 L.
    ✅ Specially developed a filter to collect towel fumes.
    ✅ Teflon Sheet inside the chamber for smooth fabric movement.
    ✅ High volume, Low-pressure soft nozzle with a larger diameter for heavy and Larger width fabrics
    ✅ Fabric drive reel with frequency controller.


     

    SKU: D/HSO-1