Shop

A Frame

A Frame

A-FRAME Trolley

A-Frame trolley is one of the most required Accessories in Textile Plant and Mills. A-frame’s objective is to carry the fabric and make it easy to manoeuvre inside the facility while different processes such as measuring, washing, cleaning, dyeing or printing, and finishing.

A-frame trolleys are also Utilised in rotating stations by simply adding an extension to them.

A-frame trolleys come in different sizes from 44 to 130 inches roller width depending on the customer. A-frame trolleys take less space than bucket/box-type trolleys. It gets easier to manage them and store them in one place.

Inshot A-Frame Tolleys are best to manage and store the grey to finished material in a clean and sorted way that helps to identify the fabric lot.

Many Textile mills and Export houses have been using it for a long time, making it reliable and one of the solutions to manage the fabric.

🔸 Technical Specification

✅ A FRAME’s top roll fabricate from M.S. Seamless Pipe (Ebonite quoting).

✅ The end shaft is RIB constructed or As per the buyer’s suggestion.

⭕ Cladding of S.S. Sheet on a batch roll. (Optional)

✅ The front side pooling system is a swivel-type M.S. fabricated bracket with 10″ x 2 wheels.

✅ The rare side is of fixed type 12″ x 3″ wheel.

✅ Batch coupling is fit on a batch roll for rotating.

✅ A-FRAME is manufactured from an M.S. channel (100/50mm) x 6mm wall thickness.

SKU: A/T-1

Loop Ager

Loop Ager

UNIFIX is appropriate for both Low Temperature & High-Temperature applications

Loop Ager

Loop Ager can be offered in five variants as mentioned below:

DIGIFIX Specially designed Machine for Digital Printing

ATMOFIX suitable for Low-Temperature Application

EVOMAX suitable for High-Temperature Applications

RAPIFIX suitable for Hot Air and Pigment Application

Loop agers are simple to use on almost any fabric that has been printed using different printing recipes. The high versatility of steam agers, together with high qualitative standards, allows their utilization in all continuous production lines for the colour fixation processes.

❇ ATMOFIX Loop Agers, the quantity of steam is injected more at the entry of the fabric as on the first few loops.

Moisture condenses on the cloth with the Exothermic reaction for colour fixation. UREA dissociation takes place in the initial few seconds By when the water vapour is distributed/injected into the chamber accordingly.

❇ EVOMAX Loop Agers are suitable for high-temperature streaming applications.

The Steam consumption is comparatively less because of the compact design of chambers manufactured by SS 316 with larger Thermos Oil Radiators/ Heaters/Gas Burners installed to heat the section faster when processing with High-Temperature steaming applications or Hot Air applications.

❇ RAPIFIX Loop Agers are robust and suitable for any working atmosphere. Curing Machines constructed of Mild Steel on the inside with an outer body made of Insulating Panels are fit for this process because the required temperature is above 130°C & the machine operates in moisture-free conditions on the inside.

Essentially, the Dyes are set to the cloth during the Curing Process by polymerization in hot air at 150°C to 160°C.

Loop Agers fabric moves in tensionless conditions. So, there are no chances for lengthwise stretching and no rubbing effect on the cloth.
In any ageing machine, the transportation of the fabric in the hanging loop form makes the fabric move in a tensionless motion.

Oil radiators & centrifugal blowers are provided which help circulation Of the surrounding air through the filters & blows it into the machine from the bottom part of the machine.

An exhaust fan removes the Hydrocarbons & Condensed Oil.

🔸 Key features of the Loop Ager Machine:

1. Compact steaming chamber design to reduce steam consumption.

2. Even the distribution of steam in the chamber, steam injected from the top & lighter than the air will force to remove air and exhaust from the bottom will be occupied in the process chamber fully make it leaving no chance of air inside the steaming compartment.

3. Optimum steam conditioning and humidification with parallel flow inside the steamer.

4. Conveyor rollers treated with shot blasting that rotates on their axis to prevent marking off from the rod itself.

5. A loop rod roller mechanism is used to create loops.

6. The steaming chamber is a closed type made of stainless steel.

7. For low-temperature steaming of the chamber roof and entry, the delivery slit is heated by steam coils preventing condensation and dripping on the fabric.

8. DIGIFIX, ATMOFIX and UNIFIX Loop Agers are equipped with a special device steam saturator that conditions the steam. It passes through the water before being injected into the steaming chamber.

These characteristics of steam pre-conditioning help prevent and control the exothermic reaction of the fabric with the printing paste. Making the machine unique & use The temperature control system/moisturising system for the said machines is the basis of the remarkable success achieved in the textile industries for Low-Temperature Applications.

9. The EVOMAX and UNIFIX Loop Agers are fitted with an effective re-circulation system and heat exchanger using either thermic fluid or direct gas fire system for high-temperature steaming, ensuring uniform temperature throughout the chamber.

10. A unique system to allow air to re-circulate in our RAPIFIX Loop Ager instead of steam permits Polymerization treatment with stifling air up to 160 ͦC.

11. Two enormous size access windows are provided on the front side, two small inspection windows on the back side and one small size window on the Drive arrangement platform.

12. Steam exhaust fan driven by variable speed AC motor, all fabric movements are pushed by variable speed AC motor.

13. Automatic control PLC system for programming and monitoring steam quantity, steam pressure, processing time & temperature is optional with our “PRO” version of all the variants of Loop Agers and Curing machines.

14. “LITE” versions of machines are also available for all variants of Agers and Curing machines for Manual operations and are also equipped with Modbus protocol and a 7” HMI for comfortable functions.

SKU: n/a

Rubber Blanket

Rubber Blanket

Rated 5.00 out of 5

(1)

Rubber Blanket

in the textile finishing process for pre-shrinking fine, lightweight cloth, Twills, Drills, & other medium-weight fabrics. Rubber Blanket has the following features:

Firstly, the Rubber Blanket is produced from the highest quality, dirt-free natural rubber and selective quality polymers to give extremely high compressive strength to the product.

Secondly, it ensures a non-stick surface for excellent fabric finish during the shrinkage process of textile.

Thirdly, the high-quality speciality rubber additive with high-performance anti-degradants is selected to prevent surface degradation of the Rubber Blanket at high-temperature processing, which gives excellent heat resistance and superior flex life to the product.

Fourthly, a Superior quality Rubber blanket can effortlessly process at high steam pressure on modern high-speed machines to give shrinkage-free fabrics. Because of the heat resistance nature of the Rubber Blanket, it Gives uninterrupted service before stopping the machine from grinding the new smooth surface.

Fifthly, The good abrasive surface and excellent flex quality of the Rubber Blanket are Expected to give at least 10 to 15% higher meterage of fabric under ideal processing conditions than other brands of Rubber Banket available in the Indian market.

Moreover, Producers of lightweight, low shrinkage potential, 100% cotton or cotton/polyester, commonly report from 15 million to 20 million meters of productive life.

🔶 Technical Specification

Hardness: The recommended hardness of a Rubber Blanket is between 36 degrees to 39 degrees depending on the fabrics to be processed.

Fabric Width: offer current width of 1200mm to 3500mm.

Usually, Rubber Banket should be 150 mm to 200 mm wider than FELT the cloth to be processed.

Pressure Circumference: The standard internal circumference of the Rubber Blanket is 3962mm (13 feet)

Thickness: The most common thickness of a Rubber Blanket is 67 mm (2.5/8″) and varies up to 70mm. The higher thickness will initially require higher force for outer surface elongation as the Blanket turns around the pressure. Results in cracks on the outer surface & will need to grind the surface frequently and often rubbing the Rubber Blanket from the inner surface. Usually, Rubber Blanket thickness depends on the required shrinkage in fabrics.

The Rubber Blanket has a maximum shrinkage capacity of Up to 15% for lightweight fabric processed on a comfit type machine 50 mm.

Usually, Rubber Belt thickness depends on the shrinkage needed in fabrics. For lightweight processed fabrics with low shrinkage fabrics such as poplins, fancy prints & synthetics dress material etc., a Belt thickness of 55 mm is required. This rubber belt will have a shrinkage capacity of 5-8% for processing heavy weight fabrics like Denim, Twill, Drills etc. thickness Belt of 67-71 mm is needed. The Rubber Belt has a maximum shrinkage capacity of Up to 15% for lightweight fabrics processed on a comfit type machine 50 mm A thick belt is most suitable with 3-5% shrinkage.

In conclusion, Rubber Blanket is best suitable for the garment industry or dyeing & printing plants which use the machines like Compressive Shrinking Range or Zero Zero & Comfit.

SKU: n/a

Fabric Inspection Fold/Batch

Fabric Inspection Fold/Batch

Firstly, it does inspection of the fabric to know if there any fault are there in fabric or to understand nature of it which came in factory for dyeing/printing/processing operations.
In other words, fabric is need to be check before starting any processes on it

Is to be use for multiple applications, In this Fabric Inspection fold/batch machine there are following features in it.

Secondly, it roll fabric on batching trolley from fold/loose form by pressure roll assisted with twin – Pneumatic Cylinders, AC Motor & Gearbox..

Thirdly, batching capacity depends on batching trolley’s capacity to load or as per need.

Fourthly, Machine working width can be made from 1000mm to 3500mm depending on client’s need.

Fifthly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be roll on this machine.

Sixth and most importantly the speed can be achieve up to 30 meters per minute while preforming the process.

In conclusion, this machine is best suitable for garment industry or dyeing & printing units.

facebook instagram youtube linkedin

SKU: n/a

Single Folding Machine

Single Folding Machine

This Single Folding machine or fabric folding machine is one of the fabric makeup machinery which has the following features :

Firstly, the Single Folding machine does fold the fabric from a loose form to an organized plated state before performing dyeing/printing/processing operations.

In other words, the fabric needs an inspection before starting any processes.

Secondly, the Single Folding machine also measures fabric length before any operation or after all processes.

Thirdly, the Single Folding machine comes in four different sizes from 41″/36 (Small)* to 72″/67 (Large)

Fourthly, woven fabrics like cotton, viscose, rayon, wool & polyester weigh from 70 to 700 gsm/meter square and fold on a Single Folding machine.

Fifth and most importantly, the speed can be achieved up to 50 meters per minute while performing the process.

In conclusion, this fabric folding machine is best suitable for the garment industry or dyeing & printing plants.

🔸 Technical Specification

✅ For fabric up to 1700MM

✅ The working table descends up to 15” (380 mm).

✅ Length is of folds adjustable up to 1.00 meter.

✅ Cast Iron sidewalls are closed to make the machine robust and sturdy.

✅ Folding blades mounted on the carriage of steel roller chains.

✅ a simple device for quick and precise folding with knife adjustment

✅ Operating speed: 50 meters/minute.

✅ Drive on motor 2HP x 960RPM.

✅ Stroke-type length Counter with manual setting or ⭕ Digital counter.

SKU: n/a

Stenter

Stenter

The Stenter or Hot air Stenter Machine is one of the Fabric Finishing Machines like Relax Dryer whose heat set capabilities give the fabric the final result of all the processes it went through.

Stenter has detachable nozzle fingers that are easy to clean and sliding filters which remove lint as they come out.

It also comes with an A.C. inverter system that allows the operator to make changes as needed within seconds.

Stenter comes with the following advance and improved features:

🔶 Higher Production Speeds

✅ Use of elongated oval Nozzle slits for higher air velocity.
✅ The lowest gap between the top and bottom Nozzle faces prevents the drop in enthalpy.
✅ High-energy blower fans displace high volumes of air.
✅ Fabric working width can be customised from 1600mm to 3400mm and cambers from 1 to 12 depending on customer need.
✅ Speed From 40 to 100 meters per minute by A.C. Inverter System.

🔶 Efficiency

✅ Double-jacketed sealed provides the best insulation.
✅ Seasoned cast iron lubricated rail provides friction-free movement of the chain.
✅ All pipelines are installed inside the machine to cut out conduction losses.
✅ Give 15% More Saving against other stenter.

🔶 Maintenance

✅ Detachable Nozzle fingers for easy cleaning & Online sliding filters for lint removal make it easy to maintain on daily bases.
✅ Online sliding filters for lint removal.
✅ Easy access inside chambers for observation.
✅ Advanced chamber technology makes it easy to install and reinstall if needed without interfering with the performance.

Working width decides upon the maximum width of fabric & chambers decide upon the maximum per day production requires.

As its Fabric Finishing machine, Stenter can finish fabric like Hosiery, Cotton, Polyester, Cotton Hosiery, Polyester Hosiery, Polyester Cotton, Wool, Mink Blanket, Polar and Many more Knitted as well as woven fabrics.

In Conclusion, this machine is best for Dyeing and Printing Plants.

SKU: S001

Relax dryer

Relax dryer

The Relax Dryer is the finishing machine to dry hosiery fabric after the fabric has been washed or processed. This Relax Dryer has the following features in it.

Firstly, The air movement produces undulations in the cloth & at the same time, it expands the knitted fabric causing dimensional shrinkage and selvedge opening.

In other words, Relax Dryer expands the fabric width while drying it.

Secondly, Relax Dryer rolls ladder-proof fabrics based on well-known the principle of air impact drying system.

Thirdly, the cloth moved through the drying chamber on a conveyor belt that overfed to increase length shrinkage.

Fourthly, The operating width of the Relax Dryer can range from 1600mm to 4200mm. Depending on the specific needs of the client.

Fifthly, Relax Dryer can process fabric ranging from 70 to 700 gsm/meter square of hosiery.

Sixth and most Important, velocity can be achieved up to 60 meters per minute while performing the process.

In conclusion, Relax Dryer is best suitable for Dyeing & Printing units.

🔸 Technical Specification

✅The number of chambers: 2 to 8.
✅Conveyor belt width: 1600mm to 4200mm.
✅ Heating system alternatives: Natural Gas, LPG, Steam or Thermic Oil.
✅ Mechanical belt speed: Step less than 0 to 60m/min.
✅ Maximum working temperature: 220 °C.
✅ Blowers: Special design, highly efficient, diagonal location, two blowers in each chamber.
✅ Fabric feeding: Step-less by multiple points.
✅ Conveyor belt direction control: Electro-pneumatic from both sides.

SKU: RD001

Compressive Shrinking Range

Compressive Shrinking Range

The Sole purpose of the Controlled Compressive Shrinking Range or ZEROZERO is to ensure that the garment made from such fabric does not shrink after the wash hence perfect dimensional stability.

As per standard, + / -1 % residual shrinkage is acceptable. Controlled Compressive Shrinking Range or ZEROZERO are available up to 3200mm working width fabric to assure total shrinkage protection to woven fabrics. It can be 100% cotton, cotton/polyester, cotton/viscose or tough and heaviest fabric like denim. Compressive Shrinking Range or ZEROZERO developed in a way that can shrinkage up to 12% in a single passage.

The most capable of shrinking medium, lightweight fabric to the heaviest denim, cotton blended suiting & shirting by watering cotton, terylene, hemp and its blends to shrink the cloth to meet the requirements of shrinkage, stabilization and improve the hand touch.

A controlled Compressive Shrinking Range is usually the last process in the sequence of fabric finishing. The woven fabric processed in the machine gets fully shrunk.

Before compressive shrinking, it is advisable to establish the width at which the cloth should get shrunk in length to meet the requirement of the garment makers. It is the best Fabric Finishing machinery.

🔸 Technical Specification

✅ A.C. frequency conversion transmission, designed speed: 10-80m/minute.
✅ Shrinkage 0 – 12 % depending upon fabric quality.
✅ Minimum and controlled tension.
⭕ Imported Rubber Blanket and Polyester Felt will be provided optionally.
✅ A Jacketed drum in 1500mm, 2000mm and 2500mm diameters.
✅ Stainless Steel damping & conditioning unit supplied as standard Parts.

SKU: n/a

Double Folding & Plating

Double Folding & Plating

Firstly, it does cross fold to make it easy to organize batches which take less space. In other words, less space and more batches to place.

Is to be use for multiple applications, In this Double Folding machine there are following features in it.

Secondly, it fold fabric in platting from loose/roll form

Thirdly, it also measure the fabric by optional given meter counter.

Fourthly, Machine working width can be made from 41″/36 (Small)* to 72″/67 (Large) depending on client’s need.

Fifthly, Fabric ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be fold on this machine.

Sixth and most importantly the speed can be achieve up to 50 meters per minute while preforming the process.

In conclusion, this machine is best suitable for Dyeing & Printing Units or Export house.

facebook instagram youtube linkedin

SKU: n/a

Chainless Merceriser

Chainless Merceriser

Chainless Merceriser

The Chainless Merceriser is the most Significant procedure for the cloth. Chainless Merceriser machine there are following features in it.

To begin with, Chainless Merceriser is one of the most fundamental steps for finishing cotton fabrics. Merceriser involves treating organic material with high-caustic soda solutions. In other words, it eliminates impurities or undesired particles from the cloth before completing other processes.

Secondly, It rolls cloth on batching trolley from fold/loose form by pressure roll assisted with twin – Pneumatic Cylinders, AC Motor & Gearbox.

Thirdly, The caustic soda-impregnated Fiber reflects light, making it brighter. It also boosts hygroscopicity, strength, and dye affinity.

Fourthly, The operating width of a chainless merceriser can range from 1500mm to 3500 mm, as preferred by the customer.

Fifthly, It can process woven fabrics with capacities ranging from 70 to 700 grammes per square metre.

Lastly, It is available in various sizes and speeds ranging from 8 to 40 metres per minute.

In conclusion, this merceriser machine is best suitable for the garment industry Dyeing & printing plants.

🔸 ADVANTAGES :

➡ Increase dye Affinity
➡ Improve Luster
➡ Add more Tensile Strength
➡ Increase Dimensional Stability of Warp & Weft yarn.
➡ Elimination of immature or Dead Cotton
➡ Improved Handling effects.
➡ Tailored to the customer’s specifications.

SKU: P/CM-1

Polymeriser

Polymeriser

Polymeriser

Polymeriser is to use for fixing printed garments. Polymeriser is an Important part of Processing machinery cause it secures the colour before the washing and finishing. There are the following features in it.

Firstly, Polymeriser assures perfect fixation of dyes even at higher temperatures. In other words, the Dyes can be permanent before starting the washing and finishing process of the cloth.

Secondly, It is most suitable for curing Phthalein dye, Pigments, and resin set.

Thirdly, Pre-dryer removes gaseous fumes from printed fabrics – an exclusive speciality of this Machine. The Machine operates efficiently in the temperature range from 30ºC Temperature to 180ºC and ensures automatic regulation of temperatures within the chamber.

Fourthly, the width can be made from 1600mm to 3200mm as per the client’s need.

Fifthly, Garment weighted from 70 to 700 gsm/per meter square can be processed.

The sixth and most Importantly speed can be achieved up to 40 meters per minute while performing the process.

In conclusion, Polymeriser is best suitable for the garment industry or dyeing & printing plants.

🔸 ADVANTAGES :

➡ Supply with hot air jets, recirculating fans and steam or thermic oil heating for best curing result.
➡ Separate blowers for top and bottom air nozzles.
➡ Its uniformity in temperature, width-wise, length and diagonally.
➡ No dropping by condensation.
➡ Variable speed up to 40 meters per minute by A.C. Inverter System.
➡ It is available in 60 to 150 meters of cloth content curing zone.

SKU: P001

Cylinder Drying Range

Cylinder Drying Range

Drying Range

The Drying Range or VDR (Vertical Drying Range Machine) is one of the most demanding processing machinery in Woven dyeing & printing plants. The Drying Range has the following features that make it an essential part of the plant.

Firstly, It ensures rapid drying of fabric at high steam pressure.

In other words, It is suitable for fabric drying, semi-drying, and fabric that doesn’t require heat setting or Clothes which need semi-dry or completely dry.

Secondly, a Belt drive or individual drive for tensionless and crease-free passage of fabric on the cylinder result in the cloth moving smoothly.

Thirdly, an Individual trapping system for faster condensate removal inside chambers.

Therefore, it keeps cylinders at maximum heat.

Fourthly, the working width options from 1250mm to 3500mm according to the client’s need.

Fifthly, ranging from 70 gsm/meter square up to 700 gsm/meter square of woven fabrics like cotton, viscose, rayon, wool & polyester can be rolled on this machine.

Sixthly and most Important Drying Range has the option of 6, 8, 10, 12, 16, 20, or 24 cylinders in a single or double frame.

Above all, more numbers of cylinders equal more speed.

In conclusion, this machine is best suitable for Dyeing and Printing Plants.

🔸 Advantages:

➡ Long Lasting & sturdy construction
➡ Lowest consumption data
➡ Quick heating up
➡ Easy to operate
➡ Drying with minimum tension
➡ Crease-free fabric passage
➡ Perfect temperature uniformity across fabric width
➡ Highest product quality
➡ Shut off valves for cylinders
➡ Lowest maintenance effort
➡ Lowest radial run out and perfect welding craftsmanship

🔸 Technical Specification:

✅ Box type or beam stack structures as per choice.
✅ Belt-driven or individual drive for tension-less and crease-free passage for fabric on cylinders.
✅ Options of 2 bowls or three bowls mangle to attached with cylinder dryer as per customer need.
✅ Any width from 1250mm to 3500mm of the dryer is supplied.
✅ The Drying Range has the option of 6, 8, 10, 12, 16, 20, or 24 cylinders in a single or double frame.
✅ Every/alternate cylinder can have an individual geared motor drive if required.
✅ An Individual trapping system for faster condensate removal from cylinders.

Drying Range Types

SKU: n/a

Value Adding Machinery

SOFT FEEL Surface Finish

Value Adding Machinery

SOFT FEEL Surface Finish

SOFT FEEL

is a new revolutionary way to create beautiful fabrics.

In other words, It is value-adding machinery that gives the fabric a soft and smooth finish.

SOFT FEEL obtains a mix of different grains of abrasive bands and abrasive brushes complete range of SUEDING and BRUSHING.

Because of increasing demand in domestic and export markets for consistent gentle and soft surface finish.

We have developed the latest SOFT FEEL surface finish machine for exceedingly smooth and even surface treatment on dry fabric like suiting, shirting, dress materials and denim.

SOFT FEEL’s Powerful fluff suction keeps fabric, brush rollers, and the inside area clean and dust-free. Therefore, it helps machinery to be low maintenance.

SOFT FEEL is committed to producing an infinitely adjustable smooth surface with an outstanding repeat accuracy of the desired effect.

SOFT FEEL comes with 3 Brush Rolls / 4 Brush Rolls and 6 Brush Rolls according to the client’s needs.

SOFT FEEL can process fabric ranging from 70 gsm/meter square to 700 gsm/meter square.

SOFT FEEL‘s working width is to be made from 1900mm to 2600mm depending on the client’s need.

🔶 ADVANTAGE:

➜ Compact Design

➜ Clear visibility of the ongoing process.

➜ Positively driven scroll roller for ceaseless fabric feeding.

➜ Rotating Pressing arrangement.

➜ Variable brush speed for required feel.

➜ Powerful fluff suction keeps fabric with brush rollers and the inside area

clean and dust free.

➜ Multi point inverter controlled drive ensures controlled fabric tension.

➜ Built-in electrical panel.

➜ User-friendly Touch Screen display.

➜ Plaiting down or optional friction batch.

Follow/Share/Visit Us on

[DISPLAY_ULTIMATE_SOCIAL_ICONS]

SKU: WIZ06

Washing Machinery

Open Width Washing Range

Washing Machinery

Open Width Washing Range